DS1338 Datasheet, PDF (15/16 Pages) Maxim Integrated Products – I2C RTC with 56-Byte NV RAM

DS1338 I²C RTC with 56-Byte NV RAM
HANDLING, PC BOARD LAYOUT, AND ASSEMBLY
The DS1338C package contains a quartz tuning-fork crystal. Pick-and-place equipment may be used, but
precautions should be taken to ensure that excessive shocks are avoided. Ultrasonic cleaning should be avoided to
prevent damage to the crystal. Exposure to reflow is limited to 2 times maximum.
Avoid running signal traces under the package, unless a ground plane is placed between the package and the
signal line. All N.C. (no connect) pins must be connected to ground.
The leaded 16-SO package may be reflowed as long as the peak temperature does not exceed 240°C. Peak reflow
temperature (≥ 230°C) duration should not exceed 10 seconds, and the total time above 200°C should not exceed
40 seconds (30 seconds nominal).
The RoHS and lead-free/RoHS packages may be reflowed using a reflow profile that complies with JEDEC J-STD-
020.
Moisture-sensitive packages are shipped from the factory dry-packed. Handling instructions listed on the package
label must be followed to prevent damage during reflow. Refer to the IPC/JEDEC J-STD-020 standard for moisture-
sensitive device (MSD) classifications.
15 of 16