English
Language : 

MAX14770E_13 Datasheet, PDF (1/16 Pages) Maxim Integrated Products – High-ESD Profibus RS-485 Transceiver
MAX14770E
High-ESD Profibus RS-485 Transceiver
General Description
The MAX14770E is a half-duplex, Q35kV high ESD-
protected transceiver for PROFIBUS-DP and RS-485
applications. In addition, it can be used for RS-422/V.11
communications. The MAX14770E is designed to meet
IEC 61158-2, TIA/EIA-422-B, TIA/EIA-485-A, V.11, and
X.27 standards.
The MAX14770E operates from a +5V supply and has
true fail-safe circuitry that guarantees a logic-high receiv-
er output when the receiver inputs are open or shorted.
The MAX14770E features a 1/4 standard-unit load
receiver input impedance, allowing up to 128 1/4 unit
load transceivers on the bus. Drivers are short-circuit
current limited and are protected against excessive
power dissipation by thermal-shutdown circuitry.
The MAX14770E is available in an 8-pin SO and an 8-pin
FMAX® specified over the extended temperature range.
It is also available in a tiny TDFN (3mm x 3mm) package
and specified over the automotive (-40NC to +125NC) tem-
perature range.
PROFIBUS-DP Networks
Industrial Fieldbuses
Motion Controllers
RS-485 Networks
Machine Encoders
Applications
Features
S Meets EIA 61158-2 Type 3 PROFIBUS-DP
S +4.5V to +5.5V Supply Voltage
S 20Mbps Data Rate
S Short-Circuit Protected
S True Fail-Safe Receiver
S Thermal-Shutdown Protected
S Hot Swappable
S High ESD Protection
±35kV Human Body Model (HBM)
±20kV IEC 61000-4-2 Air Gap
±10kV IEC 61000-4-2 Contact
S -40NC to +125NC Automotive Temperature Range
in Tiny 8-Pin (3mm x 3mm) TDFN
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
TOP
MARK
MAX14770EESA+T -40NC to +85NC 8 SO
—
MAX14770EGSA+T -40NC to +105NC 8 SO
—
MAX14770EGUA+T -40NC to +105NC 8 FMAX
—
MAX14770EATA+T -40NC to +125NC 8 TDFN-EP* BMG
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.
Functional Diagram
Typical PROFIBUS-DP Operating Circuit appears at end of
data sheet.
RO
R
RE
A
SHUTDOWN
B
DE
DI
D
MAX14770E
The PROFI BUS PROCESS FIELD BUS logo is a registered
trademark of PROFIBUS and PROFINET International (PI).
µMAX is a registered trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-5017; Rev 4; 2/13