English
Language : 

MAX14569 Datasheet, PDF (1/14 Pages) Maxim Integrated Products – Dual-Pair LLT with Charge Pump and High-ESD Protection
19-5523; Rev 0; 9/10
Dual-Pair LLT with Charge Pump
and High-ESD Protection
General Description
The MAX14569 is a dedicated dual-pair unidirectional
logic-level translator that is ideal for industrial and meter-
ing applications. Voltages VCC and VL set the logic
levels on either side of the device. Logic-high signals
present on the VL side of the device appear as high-
voltage logic signals on the VCC side of the device and
vice versa.
The device has two pairs of logic-level translators in
back-to-back configuration: one logic-level translator
from a low voltage to a high voltage and the other logic-
level translator from a high voltage to a low voltage. The
device also features a high-efficiency charge pump to
boost the battery input, VBAT, to VCC (5V).
The device features an extreme power-saving mode
that reduces supply current to a typical 0.01FA. The
device also features thermal short-circuit protection for
enhanced protection in applications that route signals
externally.
In addition, the device features enhanced high electro-
static discharge (ESD) Human Body Model (HBM) pro-
tection on OUTAVCC, INBVCC, OUTCVCC, and INDVCC
ports up to Q25kV. The MAX14569 is available in a
16-pin QSOP package, and is specified over the -40NC
to +85NC extended temperature range.
Features
S Ultra-Low Shutdown Supply Current, 0.01µA (typ)
S Ultra-Low VL Supply Current, 1µA (max)
S Operates Down to 1.6V on VL
S Continuous Current Drive Capability > 10mA
S Extended ESD Protection on VCC Input and
Output Lines
±25kV Human Body Model
±15kV IEC 61000-4-2 Air-Gap Discharge
±12kV IEC 61000-4-2 Contact Discharge
S 16-Pin QSOP Package
S -40NC to +85NC Extended Operating Temperature
Range
Applications
Automatic Meter Reader
Remote Communications System
Industrial Networking
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX14569EEE+T -40NC to +85NC
16 QSOP
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
Typical Operating Circuit
1.8V TO 3.3V
0.1μF
1μF
0.47μF
LITHIUM
BATTERY
µPROCESSOR
EN
DATA
DATA
EN
DATA
DATA
GND
VL VBAT
ENAB
INAVL
OUTBVL
CP1 CP2
CHARGE VCC 5V
PUMP
OUTAVCC
INBVCC
ENCD
INCVL
OUTDVL
MAX14569
OUTCVCC
INDVCC
GND
2.2μF
METER
TRANSMITTER
UNIT
GND
METER
TRANSMITTER
UNIT
GND
________________________________________________________________ Maxim Integrated Products   1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.