MAX1185_10 Datasheet, PDF (1/21 Pages) Maxim Integrated Products – Dual 10-Bit, 20Msps, 3V, Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs

19-2175; Rev 2; 4/10
Dual 10-Bit, 20Msps, 3V, Low-Power ADC with
Internal Reference and Multiplexed Parallel Outputs
General Description
The MAX1185 is a 3V, dual 10-bit analog-to-digital con-
verter (ADC) featuring fully-differential wideband track-
and-hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1185 is optimized for low-power, high
dynamic performance applications in imaging, instru-
mentation, and digital communication applications. This
ADC operates from a single 2.7V to 3.6V supply, con-
suming only 105mW while delivering a typical signal-to-
noise ratio (SNR) of 59.5dB at an input frequency of
7.5MHz and a sampling rate of 20Msps. Digital outputs
A and B are updated alternating on the rising (CHA)
and falling (CHB) edge of the clock. The T/H driven
input stages incorporate 400MHz (-3dB) input ampli-
fiers. The converters may also be operated with single-
ended inputs. In addition to low operating power, the
MAX1185 features a 2.8mA sleep mode as well as a
1µA power-down mode to conserve power during idle
periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1185 features parallel, multiplexed, CMOS-
compatible three-state outputs. The digital output for-
mat can be set to two’s complement or straight offset
binary through a single control pin. The device provides
for a separate output power supply of 1.7V to 3.6V for
flexible interfacing. The MAX1185 is available in a 7mm
x 7mm, 48-pin TQFP package, and is specified for the
extended industrial (-40°C to +85°C) temperature
range.
Pin-compatible, nonmultiplexed. high-speed versions of
the MAX1185 are also available. Please refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
the MAX1183 data sheet for 40Msps, and the MAX1184
data sheet for 20Msps.
High Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
Applications
Features
o Single 3V Operation
o Excellent Dynamic Performance:
59.5dB SNR at f_IN = 7.5MHz
74dB SFDR at f_IN = 7.5MHz
o Low Power:
35mA (Normal Operation)
2.8mA (Sleep Mode)
1µA (Shutdown Mode)
o 0.02dB Gain and 0.25° Phase Matching
o Wide ±1Vp-p Differential Analog Input Voltage
Range
o 400MHz, -3dB Input Bandwidth
o On-Chip 2.048V Precision Bandgap Reference
o Single 10-Bit Bus for Multiplexed, Digital Outputs
o User-Selectable Output Format—Two’s
Complement or Offset Binary
o 48-Pin TQFP Package with Exposed Paddle For
Improved Thermal Dissipation
Ordering Information
PART
TEMP
RANGE
PIN-PACKAGE
MAX1185ECM
-40°C to +85°C 48 TQFP-EP*
MAX1185ECM+
-40°C to +85°C 48 TQFP-EP*
MAX1185ECM/V+ -40°C to +85°C 48 TQFP-EP*
*EP = Exposed paddle.
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
Pin-Compatible Versions table at end of data sheet.
Pin Configuration
COM 1
V_DD 2
GND 3
INA+ 4
INA- 5
V_DD 6
GND 7
INB- 8
INB+ 9
GND 10
V_DD 11
CLK 12
MAX1185
EP
36 D1A/B
35 D0A/B
34 OGND
33 OVDD
32 OVDD
31 OGND
30 A/B
29 N.C.
28 N.C.
27 N.C.
26 N.C.
25 N.C.
48 TQFP-EP
NOTE: THE PIN 1 INDICATOR FOR LEAD-FREE
PACKAGES IS REPLACED BY A "+" SIGN.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.