TLF50241EL_15 Datasheet, PDF (7/30 Pages) Marl International Limited – 2.2 MHz Step-Down Regulator 500 mA, 5 V, low quiescent current

4
General Product Characteristics
TLF50241EL
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit
Min.
Max.
Voltages
4.1.1
4.1.2
Synchronization input
V_SYNC -0.3
5.5
V
6.2
V
4.1.3
4.1.4
Reset threshold adjust pin
V_RTADJ -0.3
5.5
V
6.2
V
4.1.5
4.1.6
Reset output
V_RO
-0.3
5.5
V
6.2
V
4.1.7
4.1.8
Feedback Input
V_FB
-0.3
5.5
V
6.2
V
4.1.9
4.1.10
Frequency adjustment pin
V_FREQ -0.3
5.5
V
6.2
V
4.1.11 Buck switch output
4.1.12 Supply voltage input
Temperatures
V_SWO -2.0
V_VS
-0.3
V_VS + 0.3 V
45
V
4.1.13 Junction temperature
4.1.14 Storage temperature
ESD Susceptibility
T_j
-40
T_stg
-55
150
°C
150
°C
4.1.15 ESD resistivity
V_ESD
-2
2
kV
4.1.16 ESD resistivity to GND
V_ESD
-500
500
V
4.1.17 ESD resistivity corner pins to GND
V_ESD
-750
750
V
1) Not subject to production test, specified by design
2) ESD susceptibility HBM according to ANSI/ESDA/JEDEC JS-001.
3) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101 or ESDA STM5.3.1
Conditions
–
t < 10s ²⁾
–
t < 10s ²⁾
–
t < 10s ²⁾
–
t < 10s ²⁾
–
t < 10s ²⁾
–
–
–
–
HBM
CDM ³⁾
CDM ³⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
7
Rev. 1.0, 2013-06-19