F10-1D22-BKB Datasheet, PDF (7/12 Pages) Magnetrol International, Inc. – F10 & F50 Flow Switches

F50 DIMENSIONAL SPECIFICATIONS
INCHES (mm)
NOTE: Model F50s are intended for use in horizontal pipelines only.
For proper performance, a straight pipe run of 12 pipe diameters upstream and
3 pipe diameters downstream of the switch is recommended.
5.93 (150)
3.87 (98)
7.94*
(201)
A
2.00
(25)
6.25*
(158)
A
Plugged
Connection size NPT
(both ends)
1.19 (30)
Horizontal
3.81
lines only
(97)
F50 Flow Switch with ³â„4" or 1" NPT Internal Pipe,
Bronze or Stainless Steel Body
CONDUIT CONNECTIONS A
Electrical Switches:
TYPE 4X/7/9: 1" NPT
Group B:
1" NPT
Pneumatic Switches:
NEMA 1:
1_{/4" NPT}
All housings rotatable 360°
Notes:
Allow the following for overhead
clearance for cover removal:
NEMA 1
TYPE 4X/7/9
Group B
8.00 (203)
10.00 (254)
10.00 (254)
*These dimensions increase by
2.19 (55) when used with Series
HS switch with terminal block.
5.93 (150)
3.87
(98)
7.94 *
(201)
A
3.00
(76)
6.25*
(158)
A
Plugged
Connection size NPT
(both ends)
2.00
(25)
Horizontal
lines only
5.75
(1.46)
F50 Flow Switch with 1¹â„2" or 2" NPT Internal Pipe,
Bronze or Stainless Steel Body
7