F10-1D22-BKB Datasheet, PDF (1/12 Pages) Magnetrol International, Inc. – F10 & F50 Flow Switches

F10 & F50
Flow Switches
DESCRIPTION
Magnetrol^® flow switches are highly reliable devices
utilized to sense the start or stop of flow in horizontal
pipelines containing oil and petroleum derivatives,
chemicals, water, or air.
Vane-actuated Model F10 switches are used on gas or
liquid flow applications in 2" or larger line sizes.
Disc actuated Model F50 switches are in-line type used
for sensing clean liquids in 2" or smaller line sizes.
FEATURES
• Actuation on increasing or decreasing flow
• Special sensing elements for non-standard or high
flow applications
• Designed for horizontal pipe applications
• Available switch styles include dry contact,
hermetically sealed and pneumatic
Model F10
• Field adjustable
• Low pressure drop
• Process pressures to 1000 psig (69 bar)
• Process temperatures to +450° F (+232° C)
• Standard flow vanes for 2" thru 10" flow lines
Model F50
• No calibration required
• Bronze or stainless steel construction
• Process pressures to 1150 psig (79.2 bar)
• Process temperatures to +750° F (+399° C)
• Bodies for flow lines from ³â„4" to 2"
Model F10
Model F50
APPLICATIONS
• Pump staging or failure
• Pipeline flow detection
• Valve failure
• Loss of pipeline flow
• Pipe blockage/rupture
• Pump inlet flow protection
• Check valve blockage/leakage
• Alarm on eyewash or shower safety station