|
705-5100-111 Datasheet, PDF (18/28 Pages) Magnetrol International, Inc. – Eclipse® Enhanced Model 705 Guided Wave Radar Level Transmitter | |||
|
◁ |
MODEL NUMBER
TWIN ROD PROBE
Models available for quick shipment, usually within one week after factory
receipt of a complete purchase order, through the Expedite Ship Plan (ESP).
BASIC MODEL NUMBER â GWR probe for in-tank mounting only
7 * B Twin Rod GWR probe
εr ⥠1.9 - WHG approved
*Specify âEâ for English (e.g., 7EB) or âMâ for Metric (e.g., 7MB)
MATERIAL OF CONSTRUCTION â wetted parts (including process connection flange when applicable)
A 316/316L (1.4401/1.4404) stainless steel with Teï¬on® spacers
B Hastelloy C (2.4819) with TFE spacers
C Monel (2.4360) with TFE spacers
J 316/316L SS NACE Construction
PROCESS CONNECTION â SIZE/TYPE
Threaded
4 1 2" NPT Thread
4 2 2" BSP (G2) Thread
ANSI Flanges
5 3 3" 150# ANSI Raised Face Flange
5 4 3" 300# ANSI Raised Face Flange
6 3 4" 150# ANSI Raised Face Flange
6 4 4" 300# ANSI Raised Face Flange
EN/DIN Flanges (consult factory for DN 50 process connections)
E A DN 80, PN 16
EN 1092-1 Type A
E B DN 80, PN 25/40 EN 1092-1 Type A
E D DN 80, PN 63
EN 1092-1 Type B2
F A DN 100, PN 16
EN 1092-1 Type A
F B DN 100, PN 25/40 EN 1092-1 Type A
F D DN 100, PN 63
EN 1092-1 Type B2
Torque Tube Mating Flanges Â
T T 600# Fisher (249B/259B) in carbon steel â as per dimensions of Figure 1 on page 11
T U 600# Fisher (249C) in stainless steel â
as per dimensions of Figure 2 on page 11
U T 600# Masoneilan ï¬ange in carbon steel â as per dimensions of Figure 3 on page 11
U U 600# Masoneilan ï¬ange in stainless steel â as per dimensions of Figure 3 on page 11
PROCESS SEAL â O-RING MATERIAL Â
0 Viton GFLT seal â for universal use
-40° F (-40° C) / +400 °F (+200° C)
2 Kalrez 4079 seal â for aggressive media -40° F (-40° C) / +400° F (+200° C)
8 Aegis PF 128 seal â for NACE applications -4° F (-20° C) / +400° F (+200° C)
INSERTION LENGTH
24 to 240 inches (60 to 610 cm)
(unit of measure is determined by second digit of Model Number)
Examples: 24 inches = 024; 60 centimeters = 060
 Always check dimensions if ANSI/DIN ï¬anges are not used.
 Consult factory for alternative o-ring materials.
Consult factory for HF Acid applications.
 For ammonia/chlorine applications use the 7xD GWR probe.
7
B
18
|
▷ |