2-1419106-2 Datasheet, PDF (8/8 Pages) Tyco Electronics – KUP Enclosed Relay

Sockets For KU Series Relays Through 3 Poles (continued)
27E121
Screw Terminal Socket
The 27E121 socket offers screw termination for KUEP, KUGP,
KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187" (4.75mm)
quick connect terminals. This socket stacks on 1.700" (43.18mm) centers.
When surface mounting, two #6-32 screws of suitable length are required.
When track mounting, two 24A071 retainer clips (not shown) are required.
The 27E121 is rated 15 amps and is UL recognized, File E59244, CSA
certified, File LR15734.
.850 ± .010
(21.59 ± .25)
.156 TYP.
(3.96)
1.700 ± .010
(43.18 ± .25)
.895 MAX.
(22.73)
.540
(13.72)
.315 MIN.
(8.00)
1.500
(38.10)
Terminal
Location
Top View
65 4
321
1.450 MAX.
(36.83)
1.900 MAX.
(48.26)
3.150 MAX.
(80.01)
B
A
987
#6-32 SCREWS &
CAPTIVE WASHERS
27E893
Screw Terminal, Din Rail Snap-Mount Socket
(use with mounting track 24A110)
The 27E893 DIN rail, snap-mount socket offers screw termination
for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with
.187" (4.75mm) quick connect terminals. This socket is constructed with a
spring-loaded latch which allows it to be quickly snapped onto or removed
from a “top hat” style mounting track. No special tools or extra hardware
is required for installation. The 27E893 is UL rated 15 amps, 94V-0, File
E59244 and CSA rated 10 amps, File LR15734.
1.550
(39.37)
1.500
(38.10)
3.000
(76.20)
.156 TYP.
(3.96)
Terminal
Location
Top View
6 54
321
B
A
1.703
(43.26)
.317 TYP.
(8.04)
.390
(9.91)
1.030
(26.16)
987
Sockets For KU Series 4 Pole Relays
Socket Selection Table
Stock items are boldfaced.
For 4 pole KUP relays with .110" (2.79mm) quick connect termination.
Socket
Socket Termianation
27E415
27E419
27E867*
.187" (4.75mm) quick connect
PC board
Screw terminals
* Use 40G432 insulator pad or customer supplied alternative.
Hold-Down Spring
20C228 or 20C254
20C228 or 20C254
20C254
Hard Mount Sockets For 4 Pole Relays
27E415–with .187" (4.75mm) quick connect/solder terminals.
27E419–with printed circuit terminals. See PC board
layout at right.
Note: Only 4 pole KUP relays with .110" (2.79mm) quick
connect terminals can be used with 4 pole hard
mount sockets.
Suggested Socket
PC Board Layout
.076 DIA. TYP.
(1.93)
.206
(5.23)
.165 ± .0 05
(4.19 ± .13)
2 HOLES
1.370
(34.80)
.50 TYP.
(12.7)
1.687
(42.85) _2.03
(51.6)
1.50
(38.1)
.875
(22.23)
.125
(3.18)
.297
(7.54)
.32 MAX.
(8.1)
W/QC TERMINALS
.060 TYP.
(1.52)
1.250
(31.75)
.340
(8.64)
.510
(12.95)
1.020
(25.91)
.328
(8.33) .626
(15.90)
.170
(4.32)
.250
(6.35)
27E415 uses same chassis cutout as
27E043.
.461 MAX.
(11.71)
W/PC TERMINALS
Screw Terminal Socket For 4 Pole Relays
27E867 offers screw termination for 4 pole KUP relays
with .110" (2.79mm) quick connect/socket mount
terminals. Rated 10 amps and is UL recognized, File
E59244.
.156 DIA.
(3.96)
(2) MTNG. HOLES
.250 ± .010 _{#6-32 SCREWS}
(6.35 ± .254)
.150 MAX.
(3.81)
5
+
9
1
A
2
++ + +
10
6
++ +
7
3
++ +
11
4
++ + +
B
8
12
+
1.750 ± .010
(44.45 ± .254)
3.50 ± .030
(88.9 ± .762)
.230 ± .030
(5.84 ± .762)
.062 REF.
(1.57)
.770 MAX.
(19.56)
Tyco Electronics Corporation - P&B, Winston-Salem, NC 27102
Technical Support Center: 1-800-522-6752, www.pandbrelays.com
Specifications and availability subject to change without notice.
13C5870
Printed in U.S.A.
IH/3-00