2-1419106-2 Datasheet, PDF (7/8 Pages) Tyco Electronics – KUP Enclosed Relay

Sockets For KU Series Relays Through 3 Poles
Socket Selection Table
Stock items are boldfaced.
For KUP, KUEP, KUGP, KUIP, and KUMP relays, through 3 poles,
with .187" (4.75mm) quick connect termination.
Socket
27E043
27E046
27E067
27E121
27E305
27E396
27E893
Socket Termination
Solder eyelet
PC board, .144" (3.66mm) terminals
.187" (4.75mm) quick connect
Screw terminals
PC board, .184" (4.67mm) terminals
.187" (4.75mm) quick connect*
Screw terminals†
Hold-Down Spring
20C228 or 20C254*
20C228 or 20C254
20C228 or 20C254
20C314 (2 per socket required)
20C228 or 20C254
20C254
20C318
* 20C228 held in place by socket hold-down screw where as 20C254 snaps onto socket.
** Snap-in mounting.
† DIN rail mounting.
Hard Mount Sockets For Relays Through 3 Poles
Nylon sockets with .187" (4.75mm) quick
connect, solder or printed circuit terminals
are available for KUEP, KUGP, KUIP, KUMP,
and KUP relays, through 3 poles, with .187"
.165 DIA.
(4.19)
2 HOLES
(4.75mm) quick connect terminals.
All are rated 15 amps and UL recognized, File ^1.370
E59244 and CSA certified File LR15734
(34.80)
27E043–with solder eyelet terminals.
27E067–with .187" (4.75mm) quick connect
terminals.
1.50
(38.1)
1.375
(34.93)
.50 TYP.
(12.7)
27E043
27E067
2.03
(51.56)
1.250
(31.75)
1.250
(31.75)
.875 ± .010
(22.23 ± .25)
.297
(7.54)
.125
(3.18)
.250
(6.35)
.297
(7.54)
.125
(3.18)
.250
(6.35)
.34 MAX.
(8.64)
.34 MAX.
(8.64)
The 27E043 and 27E067 use chassis cutout shown on this page.
27E046, 27E305
Socket With Printed Circuit Terminals
2 HOLES
.165 DIA.
(4.19)
.50 TYP.
(12.7)
1.370
(34.80)
2.03
(51.56)
1.50
(38.1)
.875 ± .010 ^.125
(22.23 ± .25) ^(3.18)
.023
(.58)
Suggested Socket
PC Board Layout
.076 DIA.
(1.93)
.626
(15.90)
.090 TYP.
(2.29)
.180 TYP.
.297 (4.57)
(7.54)
.875
(22.23)
.437
(11.10)
.218
(5.54)
1.687
(42.85)
1.076
(27.33)
.328
.156 TYP. _(8.33)
(3.96)
27E046 HAS TERMINALS .144" (3.66 mm) LONG.
27E305 HAS TERMINALS .184" (4.67 mm) LONG.
Recommended Chassis Cutout
For Hard Mount Sockets
.875
(22.23)
1.395
(35.43)
.110
(2.79)
4 PLACES
.260
(6.60)
1.687
(42.85)
1.270
(32.26)
.156 DIA.
(3.96)
2 HOLES
.208
(5.28)
Recommeded Chassis Cutout
For Snap-In Sockets
1.270
(32.26)
1.395
(35.43)
Recommended chassis thickness
.031" (.79mm) to .062" (1.57mm).
27E396
Snap-In Socket For Relays Through 3 Poles
Nylon snap-in socket with .187" (4.75mm) quick
connect terminals is available for KUEP, KUGP, KUIP,
KUMP, and KUP relays, through 3 poles, with .187"
(4.75mm) quick connect terminals. Snap-in sockets
reduce labor by eliminating time consuming screw or
rivet mounting. Preassembled wiring harnesses may
also be used as the sockets are designed to snap into
the chassis from either front or back. All are rated 15
amps and UL recognized, File E59244. The 27E396
uses chassis cutout shown on this page.
27E396–with .187" (4.75mm) quick connect terminals.
.396
(10.06)
1.260
(32.00)
1.375
(34.93)
.239
(6.07)
.020
(.51) _{.065 TYP.}
(1.65)
.281
(7.14)