3-644466-2 Datasheet, PDF (79/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
Technical Documents
The following is a list of technical documents covering the installation, operation, adjustment,
maintenance and repair of MTA application tooling.
Instruction Sheets (IS) provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Customer Manuals (CM) provide complete, detailed instructions on the installation, operation,
adjustment, maintenance and repair of complex tools and application machines.
Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and
provide instructions for installation, adjustment and maintenance of applicators used in auto-
matic and semiautomatic machines.
Hand Tools, Power Units & Accessories
Manual Arbor Frame (MTA-50)
1583518-1
Upper Tooling (MTA-50)
1583514-1
Manual Arbor Frame Assembly
58024-1
Ribbon Cable Applicator, .100
58039-1
Ribbon Cable Applicator, .156
58040-1
Manual Hand Tool
58074-1
Air Bench Mount Tool
58338-1
Air Hand Tool (MTA-100)
58575-1
Air Harness Tool (MTA-156)
58576-1
T-Handle Maintenance Tool (MTA-100) 59803-1
T-Handle Maintenance Tool (MTA-156)
Air Arbor Frame Assembly
59804-1
91112-2
IS 408-8812
IS 408-8812
IS 408-6923
IS 408-6685
IS 408-6701
IS 408-6790
IS 408-9393
IS 408-4260
IS 408-4260
IS 408-7907
IS 408-7907
IS 408-7763
2700 lb Air Bench Machine
Terminator Assembly, "G" Term
AMP-O-LECTRIC Bench Machine
Conversion Kit
Base Assembly
Base
Adapter (AMP-O-LECTRIC)
Adapter (2700 lb Machine)
Repair Kit
Repair Kit
Electric Bench Mount Tool
312522-1
354500-1
1-471273-3
690675-2
853542-1
854200-1
854468-1
854468-2
856600-1
856600-2
931800-1
CM 409-5843
CM 409-5842
CM 409-5128
IS 408-8022
IS 408-9636
IS 408-9650
IS 408-9687
IS 408-9687
IS 408-9745
IS 408-9745
CM 409-5746
One-At-A-Time Termination Tooling
Interchangeable Heads
MTA-50
1583503-1 IS 408-8801
MTA-100
58246-1
58246-2
58246-3
58442-1
58638-1
IS 408-6929
IS 408-9379
IS 408-4147
IS 408-9603
IS 408-4358
MTA-156
58247-1
IS 408-6930
58247-2
IS 408-9380
58247-3
IS 408-4146
58443-1
IS 408-9607
58061-1
IS 408-6794
58082-1
IS 408-6795
58392-1
IS 408-9450
Interchangeable Head & Loose Piece Feed Track
MTA-100
933567-1 IS 408-9435
MTA-156
933568-1 IS 408-9466
Interchangeable Heads & Tape Feed Track
MTA-100
853546-1 IS 408-9636
MTA-156
853547-1 IS 408-9637
Special Applicators
MTA-100
466728-1 AI 408-8054
MTA-156
466727-1 AI 408-8054
567020-1 AI 408-8069
Mass Termination Tooling
MTA-50
1583515-1 IS 408-8812
1583515-2 IS 408-8812
1583516-1 IS 408-8812
1583516-2 IS 408-8812
1583517-1 IS 408-8812
MTA-100
58242-1
IS 408-7994
58242-3
IS 408-7994
58243-1
IS 408-7994
58635-1
IS 408-7994
58636-1
IS 408-7994
58644-1
IS 408-4406
58644-2
IS 408-4440
59844-1
IS 408-7994
59845-1
IS 408-7994
59845-3
IS 408-7994
MTA-156
58009-1
IS 408-7995
58009-2
IS 408-7995
58010-2
IS 408-7995
58244-1
IS 408-7995
58244-3
IS 408-7995
58245-1
IS 408-7995
58245-3
IS 408-7995
58646-1
IS 408-4405
58646-2
IS 408-4439
59848-1
IS 408-7995
59848-3
IS 408-7995
Die Set Assembly
MTA-100
854175-1 IS 408-9667
MTA-156
854176-1 IS 408-9650
Typical Application Rates
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Discrete Wire
Method
Manual Hand Tool 58074-1 with
Interchangeable Head 58246-1
Electric Bench Machine 931800-1 with
Interchangeable Head 58246-1
Electric Bench Machine 931800-1 with
Interchangeable Head and
Loose-Piece Feed Track 933567-1
Electric Bench Machine 931800-1 with
Interchangeable Head and Tape Feed Track
853546-1 and 853542-1 (Base)
Terminations
Per Hour
—
900
1,100
1,250
Apply One 4-Position MTA-100 Feed-Thru
Connector per Assembly, Discrete Wire
Method
Manual Bench Tool 58024-1 with
Applicator and Holding Fixture
Terminations
Per Hour
650
For further information about tooling call Technical Support.
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Ribbon Cable*
Method
2700 lb Air Bench Machine 312522-1 with
Applicator and Tape Feed Track
854175-1 and 854200-1 (Base)
Terminations
Per Hour
7,500
* Procedure: Mass terminate 12-conductor ribbon cable with three
connectors per end. After terminating, separate by tearing the
12-conductor assembly into three 4-conductor assemblies.
Cable Notching
Method
2700 lb Air Bench Machine 312522-1 with
Ribbon Cable Notcher Assembly 854449-2
and 854468-2 (Adapter)
Cable Ends
Per Hour
1,000
79
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341