3-644466-2 Datasheet, PDF (52/84 Pages) Tyco Electronics – MTA, CST-100 II, SL-156 and AMP Economy Power

MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock High Temperature Headers—Straight
Material and Finish
Housing — UL94V-0 rated, nylon, black
Posts — Copper alloy, tin plated,
.000015 [0.00038] gold over nickel
Temperature— Maximum
Temperature Rating: 280°C
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin-lead on
the solder tail.
3. Headers with straight and right-angle
square posts are available upon
request. Minimums may apply.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with round tin plated posts:
Base number 647648 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-647648-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
No. of
Pos.
Lead Free
RoHS
Prefix/Suffix
2
3-647648–2
12
4-647648-2
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
52
For use with Infrared Reflow Process
.076 ± .003
[1.93 ± 0.08]
2 Plcs.
Mating
End
A
.156
[3.96]
Typ.
Ø .045
[1.14
±
±
.001
0.03]
Ref.
.210 Ref.
[5.33] p.Ty
Post No. 1
.125
[3.18]
.700 ± .010
71[ 7. 8 ±20. 5 ]
.450 _Ref.
[11.43]
.073
+
–
.005
.010
1[ 5.8
+0.13
–20. 5
]
yp.T
.545 ± .010
1[ 843.
±0.25 ]
Solder tail
.125 ^{± .010}
1[3. 8 ±20. 5 ]
.335
[8.51]
.425
[10.80]
.120
[3.05]Typ.
[^.3¹.²0⁰5]Typ.
[^.3¹.⁵9⁶6]Typ.
.008
[0.20]
Min. Thick Solder Paste
in Area Shown
Position No. 1
.650 ^±.010
[16.51 ^{± 0.25}]
Solder Paste Area
.057 ^±.003
[1.45 ^{± 0.08}]
Pretinned Plated
Thru Hole Typ.
.070
Typ.
[1.78]
.100
[2.54]
Pretinned Land
(Both Sides) Typ.
Recommended Mounting Hole Pattern
for .062 [1.57] Thick PC Board
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Header
Part Nos.
Round Post
Standard UL94V-0, Tin Plated
647648
Standard UL94V-0, .000015 [0.00038] Gold Plated
647649
RoHS
Equiv.
32–42
32–42
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Catalog 82056
Revised 6-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341