408-8732 Datasheet, PDF (7/8 Pages) Tyco Electronics – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

GO gage must pass completely
through the die closure
408-8732
NO-GO gage may enter partially, but
must not pass completely through the
die closure.
Wire Crimp
Plug Gage for Wire
Crimp Chamber
Locator Assembly
Removed for Clarity
Figure 8
7. REPLACEMENT
Refer to Figure 9.
These crimping die assemblies are inspected before
shipment. It is recommended that the dies be
inspected immediately upon arrival at your facility to
ensure that the dies have not been damaged during
shipment.
Order replacements through your local Tyco
Electronics representative, or call 1-800-526-5142, or
send a facsimile of your purchase order to 1-717-986-
7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
Rev A
Insulation
Crimp
Plug Gage for Insulation
Crimping Chamber
7 of 8