408-8733 Datasheet, PDF (6/7 Pages) Tyco Electronics – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

Suggested Plug Gage Design for
Wire Barrel Section of Crimping Chamber
408-8733
Suggested Plug Gage Design for
Insulation Barrel Section of Crimping Chamber
Die Closure
Configuration
Die Closure
Configuration
GAGE ELEMENT DIMENSIONS
WIRE BARREL GAGE
GO
NO-GO
INSULATION BARREL GAGE
GO
NO-GO
W (Width) (Max)
4.293-4.300
[.1690-.1693]
4.442-4.445
[.1749-.1750]
1.626-1.633
[.0640-.0643]
2.131-2.134
[.0839--.0840]
4.34
[.171}
Figure 7
5. Set insulation adjustment indicator in Position
1. Measure insulation crimping chambers with the
proper GO plug gages in the same manner as
Steps 2 and 3. See Figure 8.
GO gage must pass completely
through the die closure.
NO-GO gage may enter partially,
but must NOT pass completely
through the die closure.
Wire Crimp
Plug Gage for
Wire Crimp Chamber
Locator Assembly
Removed for Clarity
Rev A
Figure 8
Insulation
Crimp
Plug Gage for Insulation
Crimping Chamber
6 of 7