MA4PBL027 Datasheet, PDF (5/5 Pages) Tyco Electronics – HMICTM Silicon Beam-Lead PIN Diodes

MA4PBL027
HMIC Silicon Beamlead PIN Diode
V2
Handling and Assembly Procedures
The following precautions should be observed to avoid damaging these devices.
Cleanliness
These devices should be handled in a clean environment.
Static Sensitivity
Silicon PIN diodes are ESD sensitive and can be damaged by static electricity. They are classified
Class 1, HBM and proper ESD techniques should be used when handling these devices.
General Handling
A polymer layer provides scratch protection for the diode junction area and anode air bridge.
However, the leads of beam lead devices are very fragile and must be handled with extreme care.
The leads can easily be distorted or broken by the normal pressures if not careful while handling
with tweezers. A vacuum pencil with a #27 tip is the preferred choice for picking and placing.
Attachment
These devices were designed to be inserted onto hard or soft substrates. Recommended methods
of attachment include thermo-compression bonding, parallel-gap welding and electrically conductive
silver epoxy.
Ordering Information
Part Number
MA4PBL027
Packaging
Gel Pak/100pcs
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.