MA4PBL027 Datasheet, PDF (2/5 Pages) Tyco Electronics – HMICTM Silicon Beam-Lead PIN Diodes

MA4PBL027
HMIC Silicon Beamlead PIN Diode
V2
Electrical Specifications at T_AMB = 25°C
Test Conditions
Total Capacitance @ –5V/10 GHz ¹
Forward Resistance @ +20mA/10 GHz ²
Forward Voltage at +10mA
Leakage Current at –40 V
Minority Carrier Lifetime
Paramters
Ct
Rs
Vf
Ir
TL
Units
fF
Ohms
Volts
nA
nS
Min Typical Max.
–
26
30
–
4
4.9
1.2
1.36
1.5
–
50
300
–
5
10
Notes:
1. Capacitance is determined by measuring the isolation of a single series diode in a 50Ω line at 10GHz.
2. Forward series resistance is determined by measuring the insertion loss of a single series diode in a 50Ω line at
10GHz.
INCHES
MM
DIM
MIN.
MAX.
MIN.
MAX.
A
0.009
0.013
0.2286 0.3302
B
0.0049 0.0089 0.1245 0.2261
C
0.0037 0.0057 0.0940 0.1448
D
0.0049 0.0089 0.1245 0.2261
E
0.002
0.006
0.0508 0.1524
F
0.0218 0.0278 0.5537 0.70612
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: [phone] / Fax: [phone]
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.