408-2453 Datasheet, PDF (5/5 Pages) Tyco Electronics – Remove protective dust caps from both quick connect/disconnect couplers

DYNA-CRIMP Hydraulic Crimping Head 69066
408-2453
ITEM
NUMBER
PART NUMBER
DESCRIPTION
QUANTITY
PER
HEAD
1
4-21012-0
Screw, Socket Set Self-locking (Flat Point) 8-32 UNC x .250 in. Lg.
1
2
46000
Cylinder
1
4
311471-1
Coupler, Quick-disconnect, Cylinder Half
1
5
314952-1
Piston (Ram)
1
6
3-21053-4
O-Ring, 2.625 in. O.D. x 2.250 in. I.D. x .188 in. Width
1
7
2-21107-8
Ring, Back-up
1
8
300680
Spring, Ram Return
1
9
4-21012-0
Screw, Socket Set (Cone Point) 8-32 UNC x .313 in. Lg.
1
10
4-21010-1
Screw, Socket Set (Flat Point) 8-32 UNC x .313 in. Lg.
1
11
21059-5
Screw, Socket Set (Half Dog Point) 8-32 UNC x .500 in. Lg.
1
12
307002-1
D Cylinder Head And Yoke Assembly (Contains following hardware parts)
1
12a
306209-4
Pin, Latch
1
12b
303598
Pin, Retaining
1
12c
21045-9
Ring, Retaining
2
12d
4-21012-0
Screw, Socket Set Self-locking 8-32 UNC-3A x .250 in. Lg.
1
12e
5-21008-2
Screw, Socket Set (Cup Point) Self-locking 4-40 UNC x .375 in. Lg.
1
13
311833-2
Bushing
1
DThe head and yoke must be ordered and replaced as a machine fit assembly, (part number 307002-1). All other parts of the crimping head,
including items 12a through 12e, may be ordered and replaced separately.
Figure 5 (end)
Rev B
Tyco Electronics Corporation
5 of 5