MA02303GJ Datasheet, PDF (2/7 Pages) Tyco Electronics – RF Power Amplifier IC for 2.4 GHz ISM

RF Power Amplifier IC for 2.4 GHz ISM
MA02303GJ
Electrical Specifications: V_DD = +3.3 V, P_IN = -2 dBm, Duty Cycle = 100 %,
T_S = 37 °C (Note 1), measured on evaluation board shown in Figure 11.
Characteristic
Frequency Range
Output Power, ƒ = 2450 MHz
Power Added Efficiency, ƒ = 2450 MHz
Current, ƒ = 2450 MHz
Current for linear operation, ƒ = 2450 MHz,
P_IN adjusted for P_OUT = 20.0 dBm +/- 0.2 dBm
Gain, ƒ = 2450 MHz,
P_IN adjusted for P_OUT = 20.0 dBm +/- 0.2 dBm
Harmonics, ƒ = 2450 MHz
Input VSWR, ƒ = 2450 MHz
Off Isolation (V_DD=0 V)
Thermal Resistance, junction to package bottom
Third Order Intercept Point
Symbol
ƒ
P_OUT
η
I_DD
I_DD
Min.
2400
25.3
Typ.
26.5
51
265
G
29.5
2ƒ, 3ƒ, 4 ƒ
-40
—
—
—
40
R_TH
25
IP₃
43
Max.
2500
—
415
415
2.0:1
Unit
MHz
dBm
%
mA
mA
dB
dBc
—
dB
°C/W
dBm
Load Mismatch (V_DD = 5.5 V, VSWR = 8:1, P_IN = 0 dBm)
Stability (P_IN = -2 to 2 dBm, V_DD = 0-5.5 V, Load VSWR = 5:1,
all phases)
—
No Degradation in Power Output
— All non-harmonically related outputs more
than 60 dB below desired signal
1. T_S is the temperature measured at the soldering point of the downset paddle on the bottom of the IC.
Specifications subject to change without notice.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.