1-601967-1 Datasheet, PDF (17/17 Pages) Tyco Electronics – Application Tooling for Screw-Machine Contacts

408- 7516
3. Check the height of the crimped contact against
the crimp height dimensions shown in Figure 10. If
the crimp height conforms to that shown, the tool is
considered dimensionally correct. Lubricate the
tool with a thin coat of any good SAE 20 motor oil
and return it to service.
7. REVISION SUMMARY
S Updated document to corporate requirements.
6. REPLACEMENT AND REPAIR
Order replacement parts through your TE
Representative, or call 1--800--526--5142, or send a
facsimile of your purchase order to 717--986--7605, or
write to:
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
For customer repair service, contact a TE
Representative at 1--800--526--5136.
Rev E
17 of 17