MA03501D Datasheet, PDF (1/7 Pages) Tyco Electronics – X-Band Gain/Phase Control MMIC 8.0 -11.0 GHz

RO-P-DS-3004 - -
X-Band Gain/Phase Control MMIC
8.0 –11.0 GHz
Features
♦ 8.0 to 11.0 GHz Operation
♦ 6-bit Phase Shifter and 5-bit Attenuator
♦ Serial Control Input
♦ 50 Ω Input and Output Impedance
♦ Self-Aligned MSAG^® MESFET Process
Primary Applications
♦ Radar Systems
8.0-11.0 GHz Serial Input Control MMIC
Description
The MA03501D is a serial control input phase shifter/
attenuator/buffer amplifier MMIC. The on-chip serial to
parallel converter circuitry allows for control of the 6
phase and 5 attenuation bits using a single TTL/CMOS
compatable input. This product is fully matched to 50
ohms on both the input and output.
Each device is 100% RF tested on wafer to ensure
performance compliance. The part is fabricated using
M/A-COM’s repeatable, high performance and highly
reliable GaAs Multifunction Self-Aligned Gate (MSAG^®)
MESFET Process.
Electrical Characteristics: T_B = 25°C¹, Z₀ = 50Ω, V_DD = 5V, V_GG = -4V, V_EE = -4.0
Parameter
Symbol
Minimum
Typical
Maximum
Bandwidth
f
8.0
11.0
Gain
Gn
13
18
22.5
1-dB Compression Point
P1dB
21
Input Return Loss
IRL
10
16
Output Return Loss
ORL
10
16
Attenuation Range (5-bits, 0.75dB step)
23
RMS Attenuation Error (Uncorrected)
0.2
0.75 dB Attenuator Bit
0.5
0.8
1.0
1.5 dB Attenuator Bit
1.0
1.5
2.0
3 dB Attenuator Bit
2.4
3.0
3.6
6 dB Attenuator Bit
5.0
6.0
7.0
12 dB Attenuator Bit
10.8
12
13.2
Units
GHz
dB
dBm
dB
dB
dB
dB
dB
dB
dB
dB
dB
1. T_B = MMIC Base Temperature