408-9785 Datasheet, PDF (1/6 Pages) Tyco Electronics – This instruction sheet provides instruction on product application and maintenance and inspection

SOLISTRAND* Flag Terminal
Crimping Dies
Instruction Sheet
408-9785
06 APR 09 Rev B
Nest
Indenter
Yoke
Tooling Head
69067
Push Nest Into Yoke
Push Indenter Into Ram
Latch Pin Removed
Flag Terminal
Dies for Tooling
Head 69067
Place Screwdriver
Here to Remove Dies
Ram Advanced
FLAG TERMINAL
DIES
NEST
INDENTER
48506
48505
48508
48509
48507
48510
48652
48805
48806
48511
48807
1. INTRODUCTION
TOOLING HEAD
(DOCUMENT)
69067
(408-2454)
TYPICAL
TERMINALS
mm² CIRCULAR
MILL AREA RANGE
NOMINAL
WIRE SIZE
mm²
AWG
6.637-10.539
322727
7-8
8
[13,100-20,800]
10.539-16.771
321576
13-15
6
[20,800-33,100]
16.771-26.653
321060
21
4
[33,100-52,600]
26.653-42.411
321064
34-35
2
[52,600-83,700]
321066
42.411-60.551
[83,700-119,500]
59-60
1/0
321584
60.551-72.259
[119,500-150,500]
67-70
2/0
---
72.259-96.274
[150,500-190,000]
80-95
3/0
321259
96.274-117.049
[190,000-231,000]
100-125
4/0
Figure 1
inserting any die assemblies and crimping any
terminals.
This instruction sheet provides instruction on product
application and maintenance and inspection
procedures for the SOLISTRAND Flag Terminal
crimping dies listed in Figure 1. These dies are used
to crimp flag terminals on solid or stranded copper
wire sizes 7mm² – 125mm² [8–4/0 AWG]. The dies
are used in Hydraulic Head 69067. Read these
instructions and all applicable references before
Refer to Figure 1 for typical SOLISTRAND terminals
crimped, as well as the appropriate hydraulic crimping
head tooling.
NOTE
i
All dimensions on this document are in metric
units [with U.S. customary units in brackets].
Figures and illustrations are for reference only
and are not drawn to scale.
E2009 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 6
LOC B