M02015 Datasheet, PDF (6/29 Pages) M/A-COM Technology Solutions, Inc. – Low Power CMOS Transimpedance Amplifier with Rx Pwr Mon Output and AGC for Fiber

M02015
Low Power CMOS Transimpedance Amplifier with Rx Pwr Mon Output and AGC for Fiber
Optic Networks up to 2.5 Gbps
Rev V6
1.4
AC Characteristics
Table 1-4. AC Characteristics
Symbol
Parameter
Condition
Min. Typ.⁽¹⁾ Max.
Units
R_OUT
Output impedance (single ended)
–
LFC
Low frequency cutoff ⁽³⁾
–
30
50
70
Ω
–
35
50
kHz
V_D
Differential output voltage
100Ω differential load
2.125 Gbps
DCD
Duty Cycle Distortion
2.5 Gbps
2.125 Gbps, 2⁷ - 1 PRBS
DJ
Deterministic Jitter (includes DCD)
2.5 Gbps, 2²³ - 1 PRBS
Pattern Dependant Jitter (at crossing 2.125 Gbps, 2⁷ - 1 PRBS
PDJ
point) with no DCD
2.5 Gbps, 2²³ - 1 PRBS
–
250
425
mV
–
–
50
–
–
60
ps
–
–
60
–
–
70
ps_PP
–
–
29
–
–
34
ps_PP
DC to 1.59 GHz (Bessel Filter),
Cin = 0.5 pf
–
280
–
In_rms
Total input RMS noise
PIN_mean_min Minimum Input Optical Sensitivity⁽²⁾
DC to 1.87 GHz (Bessel Filter),
Cin = 0.5 pf
2.125 Gbps, BER < 10^-10
2.125 Gbps, BER < 10^-12
2.5 Gbps, BER < 10^-10
–
290
360
nA
–
-26.2
–
dBm
–
-25.7
–
–
-26.0
–
Imon_off
Monitor Output Offset
–
–
8
µA
Imon_error
Monitor Output Accuracy⁽⁴⁾
V_MON = 0 to 2V
–
–
±1.75
dB
NOTES:
1. Die designed to operate over an ambient temperature range of -40°C to +95°C, T_A and V_CC range from 3.0 - 3.6V. Typical values are tested at T_A = 25° C
and V_CC = 3.3V.
2. At stated data rate and BER. PD capacitance = 0.5 pF, Responsivity = 0.9 A/W, Extinction Ratio = 10, Temp = 25°C.
3. -26 dBm, Extinction Ratio = 10, Temp = 25°C.
4. After offset removed.
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support