M02015 Datasheet, PDF (4/29 Pages) M/A-COM Technology Solutions, Inc. – Low Power CMOS Transimpedance Amplifier with Rx Pwr Mon Output and AGC for Fiber

M02015
Low Power CMOS Transimpedance Amplifier with Rx Pwr Mon Output and AGC for Fiber
Optic Networks up to 2.5 Gbps
Rev V6
1.0 Product Specification
1.1
Absolute Maximum Ratings
These are the absolute maximum ratings at or beyond which the IC can be expected to fail or be damaged.
Reliable operation at these extremes for any length of time is not implied.
Table 1-1. Absolute Maximum Ratings
Symbol
Parameter
Rating
V_CC
Power supply (V_CC - GND)
-0.4 to +4.0
T_STG
I_IN
V_PINA, V_AGC
Storage temperature
PINA Input current
Maximum input voltage at PINA and AGC
-65 to +150
8.0 ^{(1, 2)}
-0.4 to +2.0 ⁽²⁾
I_PINK
Maximum average current sourced out of PINK
10.0
V_PINK, V_MON
I_Dout
V_Dout
Maximum input voltage at PINK and MON
Maximum average current sourced out of Dout and DoutB
Maximum input voltage at Dout and DoutB
-0.4 to Vcc +0.4
10.0 ⁽³⁾
0.0 to +2.0 ⁽³⁾
NOTES:
1. Equivalent to 4.9 mA average current.
2. Do not exceed either the I_IN or V_PINA rating. PINA damage will result in performance degradation which is difficult to detect.
3. Do not exceed either the I_Dout or V_Dout rating. Output device damage could occur.
Units
V
°C
mA_PP
V
mA
V
mA
V
1.2
Recommended Operating Conditions
Table 1-2. Recommended Operating Conditions
Symbol
Parameter
V_CC
Power supply (V_CC-GND)
C_PD
Max. Photodiode capacitance (V_r = 1.8V), for 2.125 Gbps and 2.5 Gbps data rate
T_A
Operating ambient temperature
Rating
3.3 ± 10%
0.5
-40 to +95
Units
V
pF
°C
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support