M02011 Datasheet, PDF (3/22 Pages) M/A-COM Technology Solutions, Inc. – CMOS Transimpedance Amplifier with AGC for Fiber Optic Networks up to 622 Mbps

M02011
CMOS Transimpedance Amplifier with AGC
for Fiber Optic Networks up to 622 Mbps
Rev V5
1.0 Product Specification
1.1
Absolute Maximum Ratings
These are the absolute maximum ratings at or beyond which the IC can be expected to fail or be damaged.
Reliable operation at these extremes for any length of time is not implied.
Table 1-1. Absolute Maximum Ratings
Symbol
Parameter
Rating
V_CC
Power supply (V_CC-GND)
-0.4 to +4
T_A
Operating ambient
-40 to +95
T_STG
I_IN
V_PINA
Storage temperature
PINA Input current
Maximum input voltage at PINA
-65 to +150
8 ^{(1, 2)}
-0.4 to +2.0 ⁽²⁾
I_PINK
Maximum average current sourced out of PINK
10
V_PINK, V_Dout,
V_DoutB,V_AGC,
V_MON
Maximum input voltage at PINK, Dout, DoutB, AGC and MON
-0.4 to Vcc +0.4
I_Dout, I_DoutB Maximum average current sourced out of Dout and DoutB
10
NOTES:
1. Equivalent to 4.9 mA average current.
2. Do not exceed either the I_IN or V_PINA rating. PINA damage will result in performance degradation which is difficult to detect.
Units
V
°C
°C
mA_PP
V
mA
V
mA
1.2
Recommended Operating Conditions
Table 1-2. Recommended Operating Conditions
Symbol
Parameter
V_CC
Power supply (V_CC – GND)
C_PD
Max. Photodiode capacitance (V_r = 1.8 V), for 622 Mbps data rate
T_A
Operating ambient temperature
Rating
3.3 ± 10%
1.0
–40 to +95
Units
V
pF
°C
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support