M02011 Datasheet, PDF(15/22 Page) M/A-COM Technology Solutions, Inc. – CMOS Transimpedance Amplifier with AGC for Fiber Optic Networks up to 622 Mbps

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

M02011 Datasheet, PDF (15/22 Pages) M/A-COM Technology Solutions, Inc. – CMOS Transimpedance Amplifier with AGC for Fiber Optic Networks up to 622 Mbps

◁

M02011

CMOS Transimpedance Amplifier with AGC

for Fiber Optic Networks up to 622 Mbps

Rev V5

4.4

TO-Can Layout

Figure 4-2. Typical Layout Diagram with Photodiode Mounted on PINK Capacitor (5 pin TOCAN)

DOUT

1nF

DOUTB

470pF

VCC

MON

NOTES:

Typical application inside of a five lead TO-Can.

Only one of the VCC pads and all of the GND pads need to be connected. The backside must be connected to the lowest potential, usually ground, with conductive

epoxy or a similar die attach material. If a monitor output is not required then a four lead TO-Can may be used.

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

http://www.macom.com/support

▷