MA4SW610B-1 Datasheet, PDF (2/6 Pages) Tyco Electronics – SP6T PIN Diode Switch with Integrated Bias Network

MA4SW610B-1
SP6T PIN Diode Switch with Integrated Bias Network
2 - 18GHz
Rev. V2
Electrical Specifications @ T_A = 25 °C, +/- 10 mA Bias Current (On-Wafer Measurements)
Parameters
Insertion Loss
Isolation
Input Return Loss
Frequency
6 GHz
12 GHz
18 GHz
6 GHz
12 GHz
18 GHz
6 GHz
12 GHz
18 GHz
Minimum
-
-
-
43
35
30
-
-
-
Typical
1.0
1.3
1.9
49
43
39
18
20
16
Maximum
1.4
2.0
2.9
-
-
-
-
-
-
Units
dB
dB
dB
dB
dB
dB
dB
dB
dB
6 GHz
-
19
-
dB
Output Return Loss
12 GHz
-
22
-
dB
18 GHz
-
20
-
dB
Switching Speed¹
10 GHz
-
80
-
nS
1. Typical switching speed is measured from 10% to 90% of the detected RF voltage driven by a TTL compatible driver.
Driver output parallel RC network uses a capacitor between 390pF - 560pF and a resistor between 150 - 220Ω to achieve
80ns rise and fall times.
Typical Driver Connections
Control Level (DC Current)
B2 B3
B4
B5 B6
B7
J2-J1
Condition of RF Output
J3-J1 J4-J1
J5-J1
J6-J1
-10 mA +10 mA +10 mA +10 mA +10 mA +10 mA Low Loss Isolation Isolation Isolation Isolation
J7-J1
Isolation
+10 mA -10 mA +10 mA +10 mA +10 mA +10 mA Isolation Low Loss Isolation Isolation Isolation Isolation
+10 mA +10 mA -10 mA +10 mA +10 mA +10 mA Isolation
+10 mA +10 mA +10 mA -10 mA +10 mA +10 mA Isolation
+10 mA +10 mA +10 mA +10 mA -10 mA +10 mA Isolation
+10 mA +10 mA +10 mA +10 mA +10 mA -10 mA Isolation
Isolation Low Loss Isolation Isolation Isolation
Isolation Isolation Low Loss Isolation Isolation
Isolation Isolation Isolation Low Loss Isolation
Isolation Isolation Isolation Isolation Low Loss
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.