English
Language : 

MA4SW410 Datasheet, PDF (2/7 Pages) Tyco Electronics – SP4T Monolithic PIN Diode Switch
MA4SW410
HMIC™ Silicon SP4T PIN Diode Switch
RoHS Compliant
V6
Electrical Specifications @ TAMB = +25oC, ± 20mA Bias Current (On-Wafer Measurements)
Parameter
Frequency
Minimum
Nominal
Maximum
Units
Insertion Loss
20 GHz
0.9
1.3
dB
Isolation
20 GHz
28
34
dB
Input Return Loss
20 GHz
15
dB
Output Return Loss
20 GHz
15
dB
Switching Speed1
10 GHz
50
nS
Note:
1. Typical switching speed is measured from 10% to 90% of detected RF voltage driven by a TTL compatible driver.
Driver output parallel RC network uses a capacitor between 390pF – 560pF and a resistor between 150Ω – 220Ω to
achieve 50nS rise and fall times.
Typical Driver Connections
Control Level ( DC Current ) at Port
Condition
of
RF Output
Condition
of
RF Output
Condition
of
RF Output
Condition
of
RF Output
J2
J3
J4
J5
J1 - J2
J1 - J3
J1 - J4
J1 - J5
-20mA
+20mA
+20mA
+20mA Low Loss Isolation Isolation Isolation
+20mA
-20mA
+20mA
+20mA
Isolation Low Loss Isolation Isolation
+20mA
+20mA
-20mA
+20mA
Isolation
Isolation Low Loss Isolation
+20mA
+20mA
+20mA
-20mA
Isolation
Isolation
Isolation Low Loss
Compatible M/A-COM Tech Driver
MADR-009190-000100
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.