M02061_17 Datasheet, PDF (2/45 Pages) M/A-COM Technology Solutions, Inc. – 3.3 or 5 Volt Laser Driver

M02061-12/-21
3.3 or 5 Volt Laser Driver
Rev V6
Ordering Information
Part Number
Package
M02061-12
QFN24
M02061G-12*
QFN24 (RoHS Compliant)
M02061-21
QFN24
M02061G-21*
QFN24 (RoHS Compliant)
M02061-EVM
Combination Optical and Electrical Evaluation board
*The G in the part number indicates that this is an RoHS compliant package.
Pin Configuration
DISDLY function on pin 8
DISDLY function on pin 8
SCB function on pin 8
SCB function on pin 8
DISDLY function on pin 8
Revision History
Revision
V6
V5
Level
Release
Release
G (V4)
Release
F (V3)
Release
E (V2)
D (V1)
Release
Release
C
Preliminary
Date
May 2015
November 2014
July 2012
February 2010
February 2006
September 2005
March 2004
Description
Updated logos and page layout. No content changes.
Add Figure 4-2 . Recommended component values for AC coupling Laser. Change data sheet marking and
numbering to the MACOM system.
Added recommendation for 100 k Ω pull-up resistor at pin 14 IBIASout when pin 18 SVCC is used to control
laser current.
Added CPRI data rates to front page.
Added T_J specification and added equation for T_A specification in Table 1-1.
Added information for the M02061-21 with pin SCB instead of pin DISDLY.
New format. Remove 32 pin package information.
Changes to Absolute Maximum Specifications - operating temperature, output voltage.
Changes to Recommended Operating Conditions - VCC, operating temperature.
Changes to DC Characteristics - ICC, VMD, TxPWRmon, logic inputs and outputs, data inputs, safety logic
thresholds.
Changes to AC Characteristics - IMOD, Tr, Tf, jitter.
Added eye diagram, ; corrected rise/fall times.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support