M02061_17 Datasheet, PDF (15/45 Pages) M/A-COM Technology Solutions, Inc. – 3.3 or 5 Volt Laser Driver

M02061-12/-21
3.3 or 5 Volt Laser Driver
Rev V6
Table 2-1.
4x4 mm
QFN24 Pin
Number
6
M02061 Pin Definitions and Descriptions (3 of 9)
Pin Name
Pin equivalent load
Function
FAIL
V_CC
Safety circuit control failure output (TTL/CMOS). Goes high when a safety logic fault
is detected. This output will be low when DIS is high.
FAIL
7
RESET
V_CC
Safety circuit reset. Leave open for normal operation or add a capacitor to ground to
V_CC3
extend the reset time.
Connect to GND to disable window comparators at APC_SET
RESET
190 Ω
15
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support