M02014 Datasheet, PDF (12/19 Pages) M/A-COM Technology Solutions, Inc. – CMOS Transimpedance Amplifier with AGC for Fiber Optic Networks up to 2.5 Gbps

Applications Information
4.2
TO-Can Layout
Figure 4-2. Typical Layout Diagram with Photodiode Mounted on PINK Capacitor (5 pin TO-Can)
GND
GND
DOUT
1nF
470pF
DOUTB
VCC
MON
NOTES:
Typical application inside of a 5 lead TO-Can.
Only one of the V_CC pads and one of the GND pads need to be connected (though in noisy environments two or more GND pads connected may
improve performance). The backside must be connected to the lowest potential, usually ground, with conductive epoxy or a similar die attach
material. If a monitor output is not required then a 4 lead TO-Can may be used.
02014-DSH-001-D
Mindspeed Technologies^®
10
Mindspeed Proprietary and Confidential