XR1004-BD_15 Datasheet, PDF (1/8 Pages) M/A-COM Technology Solutions, Inc. – Receiver

XR1004-BD
Receiver
30.0-46.0 GHz
Features
 Sub-harmonic Receiver
 Integrated LNA, LO Doubler/Buffer,
Image Reject Mixer
 +4.0 dBm Input Third Order Intercept (IIP3)
 +2.0 dBm LO Drive Level
 9.0 dB Conversion Gain
 3.5 dB Noise Figure
 18.0 dB Image Rejection
 100% On-Wafer RF, DC & Noise Figure Testing
 100% Commercial-Level Visual Inspection Using
Mil-Std-883 Method 2010
 RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM Tech’s 30.0-46.0 GHz GaAs MMIC
receiver has a noise figure of 3.5 dB and 18.0 dB
image rejection across the band. This device is a
three stage LNA followed by an image reject
resistive pHEMT mixer and includes an integrated
LO doubler and LO buffer amplifer. The image reject
mixer eliminates the need for a bandpass filter after
the LNA to remove thermal noise at the image
frequency. The use of integrated LO doubler and LO
buffer amplifier makes the provision of the LO easier
than for fundamental mixers at these frequencies. I
and Q mixer outputs are provided and an external
90 degree hybrid is required to select the desired
sideband. This MMIC uses M/A-COM Tech’s GaAs
PHEMT device model technology, and is based
upon electron beam lithography to ensure high
repeatability and uniformity. The chip has surface
passivation to protect and provide a rugged part with
backside via holes and gold metallization to allow
either a conductive epoxy or eutectic solder die
attach process. This device is well suited for
Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Ordering Information
Part Number
Package
XR1004-BD-000V
Where “V” is RoHS compli-
ant die packed in vacuum
released gel paks
XR1004-BD-EV1
evaluation module
Chip Device Layout
Rev. V1
Absolute Maximum Ratings
Parameter
Absolute Max.
Supply Voltage (Vd)
Supply Current (Id1,2), (Id3)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+6.0 VDC
110,180 mA
+0.3 VDC
+5 dBm
-65 ºC to +165 ºC
-55 ºC to Table¹
MTTF Table¹
(1) Channel temperature affects a device's MTTF. It is recommended to
keep channel temperature as low as possible for maximum life.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.