PACKAGEDPINDIODES_15 Datasheet, PDF (1/7 Pages) M/A-COM Technology Solutions, Inc. – Packaged PIN Diodes

Packaged PIN Diodes
Features
♦ High Power
♦ Fast Speed
♦ Voltage Ratings to 1500 Volts
♦ Wide Selection of Carrier Lifetimes
♦ Wide Selection of Capacitances
♦ Assortment of Packages Styles
♦ Available Screened for Military Applications
♦ RoHS Compliant
Description and Applications
M/A-COM Tech’s broad line of packaged PIN diodes
encompass a comprehensive range of electrical
characteristics and package outlines. This diverse un-
ion of semiconductor technology and chip packaging
gives considerable flexibility to the circuit designer. The
fast switching series of Packaged PIN Diodes utilize a
thin I-region, silicon oxide or glass passivated chip
which provides for low leakage current and low inser-
tion loss. With the use of in process control monitors to
regulate wafer fabrication parameters, these devices
will achieve consistent performance in control circuit
applications. The high voltage product line of Packaged
PIN Diodes employs M/A-COM Tech's CERMACHIP^®
passivation process which provides for a hard glass
encapsulation that hermetically seals and protects the
active area of the chip. These packaged CERMACHIP^®
PIN diodes are ideally suited for use in high power ap-
plications where high level RF voltages are present.
The diode chips are bonded into sealed ceramic pack-
ages that are designed for the most stringent electrical
and environmental conditions. An extensive choice of
package styles are available which may be used in a
wide variety of RF microwave circuits. The Packaged
PIN Diodes series are designed to have a high inherent
reliability and may be ordered screened to meet many
MIL-STD requirements.
V11
Maximum Power Dissipation
Cathode Heatsink Packages
30,31,32,36,43,94,111,120,
150,255 258,296,1072,1079
P_diss = T (max oper.) - 25°C
Thermal Resistance
Leaded Packages +25°C
144, 186, 276,1088
Surface Mount Package +25°C
1056
P_diss = 250mW
P_diss = 300mW
Co-Axial Packages
31,32,94
36
30, 296 120,255
Leaded/Surface Mount Packages
Thru Hole
276
1088
1072,1079
186
1056
144
Threaded Packages
Absolute Maximum Ratings¹
Parameter
Absolution Max.
Voltage
As Specified in Table
Operating Temperature
- 65°C to +175°C
Storage Temperature
- 65°C to +200°C
Operating and Storage
(Case Style 1088)
- 65°C to +125°C
1. Operation beyond any one of the above conditions may
cause permanent damage to the device.
1
Specifications subject to change without prior notification.
150
111
43
258
Unpackaged Die
131,132.134 , 212
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.