MA4SWX10 Datasheet, PDF (1/9 Pages) M/A-COM Technology Solutions, Inc. – Specified from 50 MHz to 20 GHz

MA4SWx10 Series
HMIC™ Silicon PIN Diode Switches
Features
 Broad Bandwidth
 Specified from 50 MHz to 20 GHz
 Usable from 50 MHz to 26.5 GHz
 Lower Insertion Loss / Higher Isolation
 Fully Monolithic, Glass Encapsulated Chip
 Up to +33 dBm CW Power Handling @ +25°C
 RoHS* Compliant
Description
The MA4SW110 (SPST), MA4SW210 (SPDT) and
MA4SW310 (SP3T) are series-shunt, broadband,
PIN diode switches made with MACOM’s HMIC^TM
(Heterolithic Microwave Integrated Circuit) process.
This process allows the silicon pedestals which form
the series - shunt diodes and vias to be embedded
into low loss, low dispersion glass. By also
incorporating small spacing between circuit
elements, the result is an HMIC chip with low
insertion loss and high isolation at frequencies up to
26.5 GHz.
They are designed for use as moderate power, high
performance switches and provide superior
performance when compared to similar designs that
use discrete components.
The top side of the chip is protected by a polymer
coating for manual or automatic handling and large
gold bond pads help facilitate connection of low
inductance ribbons. The gold metallization on the
backside of the chip allows for attachment via 80/20,
gold/tin solder or conductive silver epoxy.
Functional Diagrams
J1
Rev. V11
J2
MA4SW110 (SPST)
J2
J3
J1
MA4SW210 (SPDT)
J3
Ordering Information
Part Number
MA4SW110
MA4SW210
MA4SW310
Package
Gel Pack
Gel Pack
Gel Pack
J2
J4
J1
MA4SW310 (SP3T)
*Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support