MA4SW410B-1_14 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – Broad Bandwidth Specified up to 18 GHz

MA4SW410B-1
HMIC™ Silicon SP4T PIN Diode Switch
with Integrated Bias Network
Features
 Broad Bandwidth Specified up to 18 GHz
 Usable up to 26 GHz
 Integrated Bias Network
 Low Insertion Loss / High Isolation
 Fully Monolithic, Glass Encapsulated Chip
 RoHS* Compliant
Description
The MA4SW410B-1 device is a SP4T broadband
switch with integrated bias network utilizing
MACOM's HMIC^TM (Heterolithic Microwave
Integrated Circuit) process, US Patent 5,268,310.
This process allows the incorporation of silicon
pedestals that form series and shunt diodes or vias
by imbedding them in low loss, low dispersion
glass. By using small spacing between elements,
this combination of silicon and glass gives HMIC
devices low loss and high isolation performance with
exceptional repeatability through low millimeter
frequencies. Large bond pads facilitate the use of
low inductance ribbon bonds, while gold backside
metallization allows for manual or automatic chip
bonding via 80/20 - Au/Sn, 62/36/2 - Sn/Pb/Ag
solders or electrically conductive silver epoxy.
These high performance switches are suitable for
use in multi-band ECM, Radar, and instrumentation
control circuits where high isolation to insertion loss
ratios are required. With a standard +5 V / -5 V, TTL
controlled PIN diode driver, 80 ns switching speeds
can be achieved.
Functional Diagrams
Rev. V4
Yellow areas denote wire bond pads
J1 Common Port
DC Bias
J2
J5
Ordering Information
Part Number
MA4SW410B-1
Package
Gel Pack
J3 J4
*Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support