CMM4000 Datasheet, PDF (1/9 Pages) List of Unclassifed Manufacturers – 2.0-18.0 GHz GaAs MMIC Low Noise Amplifier

2.0-18.0 GHz GaAs MMIC
Buffer Amplifier
September 2009 - Rev 21-Sep-09
Features
Self Bias Architecture
On-Chip Drain Bias Coil/DC Blocking
8.5 dB Small Signal Gain
4.5 dB Noise Figure
+19.0 dBm P1dB Compression Point
100% Visual Inspection to MIL-STD-883
Method 2010
CMM4000-BD
Chip Device Layout
General Description
Mimix Broadband’s 2.0-18.0 GHz GaAs MMIC
distributed low noise amplifier has a small signal gain
of 8.5 dB with a noise figure of 4.5 dB across the band.
This MMIC uses Mimix Broadband’s GaAs PHEMT device
model technology, and is based upon optical beam
lithography to ensure high repeatability and uniformity.
The chip has surface passivation to protect and provide
a rugged part with backside via holes and gold
metallization to allow either a conductive epoxy or
eutectic solder die attach process. This device is well
suited for fiber optic, microwave radio, military, space,
telecom infrastructure, test instrumentation and VSAT
applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)¹
+8.5 VDC
175 mA
+20 dBm
-65 to +165 ºC
-55 to +85 ºC
+175 ºC
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness ( S21)
Reverse Isolation (S12)
Noise Figure (NF)
Output Power for 1 dB Compression (P1dB)
Output Second Order Intercept Point (OIP2)
Output Third Order Intercept Point (OIP3)
Drain Bias Voltage (Vd)
Supply Current (Id) (Vd=5.0V)
Units Min. Typ. Max.
GHz
2.0
-
18.0
dB
7.0
12.0
-
dB
10.0
15.0
-
dB
7.0
8.5
-
dB
-
+/-0.5
-
dB
-
25.0
-
dB
-
4.5
7.5
dBm 17.0 +19.0
-
dBm
-
+39.0
-
dBm
-
+29.0
-
VDC +4.5 +5.0 +7.0
mA
100
115
130
100% on-wafer DC testing and 100% RF wafer qualification. Wafer qualification includes sample testing from each quadrant
with an 80% pass rate required.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 9
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.