LAFL-C2-0350 Datasheet, PDF (3/25 Pages) Lumileds Lighting Company – Automotive Forward Lighting Source

Product Information
Part Number Description
LUXEON Altilon LEDs are tested and binned at 1000 mA, with current pulse duration of 20ms.
LUXEON Altilon
L
A
F
L
Standard Prefix for LUXEON Altilon
-
C
2
S
-
Default
Number of Chips - Solder or Spade
2 or 4
Lugs - S or L
X
X
X
X
Minimum Flux Bin
LUXEON Altilon Core
L
A
C
L
-
C
2
S
-
Standard Prefix for LUXEON Altilon Core
Default
Number of Chips -
2 or 4
Solder
Configuration
X
X
X
X
Minimum Flux Bin
Test Conditions for Optical Characteristics
Junction Temperature vs. Case Temperature
Philips Lumileds specifies performance at constant case temperature for LUXEON Altilon. This datasheet specifies performance at constant case
temperature of 25°C, except where noted. The data sheet that follows will specify performance at constant case temperature of 25°C.
Case temperature refers to the temperature of a thermocouple mounted under the head of one of the mounting screws, and is a value that can
be measured rather than calculated (see Figure 7). A junction-to-case thermal resistance of 2.1°C/W is assumed for the 1x2 configuration and
1.4°C/W for the 1x4 configuration. This approach will more accurately capture product performance capabilities compared to average junction
temperature alone.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the lighting industry. LUXEON Altilon is compliant to the
European Union directives on the restriction of hazardous substances in electronic equipment, namely, the RoHS, ELV, and REACH directives.
Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Altilon product: lead, mercury, cadmium, hexvalent
chromium, polybrominated biphenyls (PBB), or polybrominated diphenyl ethers (PBDE).
LUXEON Altilon Datasheet DS66 20130320
3