LAFL-C2-0350 Datasheet, PDF (10/25 Pages) Lumileds Lighting Company – Automotive Forward Lighting Source

Absolute Maximum Ratings

Parameter
Maximum DC Forward Current (mA) ^[1]
Minimum DC Forward Current (mA) ^[1]
Maximum Transient Peak Current
Maximum Vf at 1000 mA & -40°C ^[2]

Minimum Vf at 1000 mA & 130°C ^[3]

Maximum AC Ripple
ESD Sensitivity ^[4]
Storage Temperature
Minimum Operating Case Temperature
Maximum Case Temperature (1000 mA) ^[5]
Maximum Allowed Solder Pad Temperature
Table 4.
Value
1100
100
1500 mA for ≤ 10 ms
15.8 Volts (1x4)
7.9 Volts (1x2)
10.0 Volts (1x4)
5.0 Volts (1x2)
≤50 mA rms at ≥10 kHz
8kV HBM, 2kV CDM, 400V MM
-40°C to +130°C
-40°C
130°C
270°C, max. 30 sec.
Notes for Table 4:
1. Although no damage to the device will occur, driving these high power LEDs at drive currents below 350 mA or above 1000 mA may result in
unpredictable performance. Please consult your Philips Lumileds sales representative for further information.
2. Product Vf at 1000 mA operation, case temperature -40°C after 1000 hours of operation at rated conditions.
3. Product Vf at 1000 mA operation, case temperature 130°C after 1000 hours of operation at rated conditions.
4. Measured using human body model, contact discharge method, and machine model (per AEC-Q101C).
5. Maximum case temperature for short term operation only. See section on reliability expectation and thermal design requirements for
recommendations on maximum case temperature to ensure life of vehicle performance.
6. LEDs are not designed to be driven in reverse bias.
JEDEC Moisture Sensitivity
Table 6.
Level
Floor Life

Time Conditions
1
unlimited [ 30°C /85% RH
LUXEON Altilon Datasheet DS66 20130320
10