WB40NBT Datasheet, PDF (8/26 Pages) Laird Tech Smart Technology – This document describes key hardware aspects of the Laird SDC-WB40NBT wireless bridge module

WB40NBT
Datasheet
5 GHz Frequency Bands
5 GHz Operating Channels
Maximum Transmit Power
Note: Maximum transmit power
varies according to individual
country regulations. All values
nominal, +/-2 dBm.
Note: Laird 40 series radios
support a single spatial stream
and 20 MHz channels only.
Typical Receiver Sensitivity
Note: All values nominal, +/-3
dBm.
KC: 13 (3 non-overlapping)
ETSI
5.15 GHz to 5.35 GHz
5.47 GHz to 5.725 GHz
FCC
5.15 GHz to 5.35 GHz
5.47 GHz to 5.725 GHz
5.725 GHz to 5.82 GHz
MIC (Japan)
5.15 GHz to 5.35 GHz
KC
5.15 GHz to 5.35 GHz
5.725 GHz to 5.82 GHz
ETSI: 19 non-overlapping
FCC: 24 non-overlapping
MIC (Japan): 8 non-overlapping
KC: 12 non-overlapping
802.11a
6 Mbps 16 dBm (40 mW)
54 Mbps 14 dBm (25 mW)
802.11b
1 Mbps 17 dBm (50 mW)
11 Mbps 16 dBm (40 mW)
802.11g
6 Mbps 15 dBm (32 mW)
54 Mbps 13 dBm (20 mW)
802.11n (2.4 GHz)
6.5 Mbps (MCS0) 15 dBm (32 mW)
65 Mbps (MCS7) 11 dBm (13 mW)
802.11n (5 GHz)
6.5 Mbps (MCS0) 16 dBm (40 mW)
65 Mbps (MCS7) 13 dBm (20 mW)
Bluetooth
0 dBm (1mW) (Class 2)
802.11a:
6 Mbps
-90 dBm
24 Mbps
-84 dBm
54 Mbps
-75 dBm (PER <= 10%)
802.11b:
1 Mbps
-96 dBm
11 Mbps
-89 dBm (PER <= 10%)
802.11g:
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
8
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]