WB40NBT Datasheet, PDF (18/26 Pages) Laird Tech Smart Technology – This document describes key hardware aspects of the Laird SDC-WB40NBT wireless bridge module

WB40NBT
Datasheet
7 MECHANICAL SPECIFICATIONS
7.1 Mounting
The WB40NBT board provides the following: 245046120600829+ CONN RECEPT 120 POS SMD 0.5MM
There are four Kyocera Elco options for mating connectors, each option providing for four different stack
heights. Depending on the board to board space required the main board part number is:
Part Number Contacts
B2B (mm) Newark PN
145046120630829+ 120
Plug 3.0 96M9299
145046120635829+ 120
Plug 3.5 96M9300
145046120640829+ 120
Plug 4.0 96M9301
145046120645829+ 120
Plug 4.5 03M4923
The WB40NBT provides four grounded mounting holes located on the corners of the module. One or more of
these mounting holes may be used to secure the module to the host device with conductive screws with
bushings that correspond to the selected stack height.
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
18
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]