LTC3615-1_15 Datasheet, PDF (23/32 Pages) Linear Technology – Dual 4MHz, 3A Synchronous Step-Down DC/DC Converter

LTC3615/LTC3615-1
Applications Information
External Reference Input (DDR Mode)
If SRLIM is tied to SV_IN, the TRACK/SS pin can be used
as an external reference input between 0.3V and 0.5V, if
desired (see Figure 13).
In DDR mode, the maximum slew rate is selected. If V_TRACK/
SS ^{is within 0.3V and 0.5V, the PGOOD function is enabled.}
If V_TRACK/SS is less than 0.3V, the output current foldback
is disabled and the PGOOD pin is always pulled down.
V_FB PIN ^0.6V
VOLTAGE _0V
0.6V
TRACK/SS
PIN VOLTAGE ^0.1V
0V
V_IN
RUN PIN
VOLTAGE
0V
SV_IN PIN ^VIN
VOLTAGE
0V
SHUTDOWN SOFT-START
STATE
STATE
t_SS > 1ms
RUN STATE
TIME
REDUCED
RUN STATE
SWITCHING
FREQUENCY
3615 F13
DOWN-
UP-
TRACKING TRACKING
STATE
STATE
Figure 13. Tracking if V_SRLIM Is Low
0.45V
V_FB PIN ^0.3V
VOLTAGE _0V
0.45V
TRACK/SS ^0.3V
PIN VOLTAGE ^0.1V
0V
V_IN
RUN PIN
VOLTAGE
0V
SV_IN PIN ^VIN
VOLTAGE
0V
SHUTDOWN SOFT-START
STATE
STATE
t_SS > 1ms
EXTERNAL
VOLTAGE
REFERENCE 0.45V
RUN STATE
TIME
REDUCED
RUN STATE
SWITCHING
FREQUENCY
DOWN-
UP-
3615 F14
TRACKING TRACKING
STATE
STATE
Figure 14. Tracking if V_SRLIM Is Tied to SV_IN
For more information www.linear.com/LTC3615
3615fb
23