LT1078_1 Datasheet, PDF (20/20 Pages) Linear Technology – Micropower, Dual and Quad, Single Supply, Precision Op Amps

LT1078/LT1079
PACKAGE DESCRIPTION
0.300 – 0.325
(7.620 – 8.255)
0.130 ± 0.005
(3.302 ± 0.127)
N Package
14-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510)
0.045 – 0.065
(1.143 – 1.651)
0.770*
(19.558)
MAX
14 13 12 11 10 9
8
0.009 – 0.015
(0.229 – 0.381)
0.020
(0.508)
MIN
+0.035
0.325 _–0.015
( ) ^8.255
+0.889
–0.381
0.125
(3.175)
MIN
0.005
(0.125)
MIN 0.100
(2.54)
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
BSC
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCH (0.254mm)
0.065
(1.651)
TYP
0.255 ± 0.015*
(6.477 ± 0.381)
0.018 ± 0.003
(0.457 ± 0.076)
1
2
3
4
5
6
7
N14 1098
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610)
0.010
(0.254
–
–
0.020
0.508)
×
45°
0.008 – 0.010
(0.203 – 0.254)
0.053 – 0.069
(1.346 – 1.752)
0°– 8° TYP
0.016 – 0.050
(0.406 – 1.270)
0.014 – 0.019
(0.355 – 0.483)
TYP
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
0.004 – 0.010
(0.101 – 0.254)
0.050
(1.270)
BSC
0.228 – 0.244
(5.791 – 6.197)
0.189 – 0.197*
(4.801 – 5.004)
8
7
6
5
1
2
34
0.150 – 0.157**
(3.810 – 3.988)
SO8 1298
0.291 – 0.299**
(7.391 – 7.595)
0.010
(0.254
–
–
0.029
0.737)
×
45°
SW Package
16-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)
0.398 – 0.413*
(10.109 – 10.490)
0.093 – 0.104
(2.362 – 2.642)
0.037 – 0.045
(0.940 – 1.143)
16 15 14 13 12 11 10 9
0° – 8° TYP
0.050
0.009 – 0.013
(0.229 – 0.330)
NOTE:
NOTE 1
0.016 – 0.050
(0.406 – 1.270)
(1.270)
BSC _{0.014 – 0.019}
(0.356 – 0.482)
TYP
1. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
0.004 – 0.012 ^{NOTE 1}
(0.102 – 0.305)
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
20 Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone] ^q FAX: [phone] ^q www.linear.com
0.394 – 0.419
(10.007 – 10.643)
123 45678
S16 (WIDE) 1098
10789fe
LT/CPI 1201 1.5K REV E • PRINTED IN USA
© LINEAR TECHNOLOGY CORPORATION 1994