LTC3407A Datasheet, PDF (15/16 Pages) Linear Technology – Dual Synchronous 600mA, 1.5MHz Step-Down DC/DC Regulator

LTC3407A
PACKAGE DESCRIPTION
DD Package
10-Lead Plastic DFN (3mm × 3mm)
(Reference LTC DWG # 05-08-1699)
0.675 ±0.05
R = 0.115
TYP
6
0.38 ± 0.10
10
3.50 ±0.05
1.65 ±0.05
2.15 ±0.05 (2 SIDES)
PACKAGE
OUTLINE
PIN 1
TOP MARK
(SEE NOTE 6)
0.25 ± 0.05
0.50
BSC
2.38 ±0.05
(2 SIDES)
0.200 REF
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
NOTE:
1. DRAWING TO BE MADE A JEDEC PACKAGE OUTLINE M0-229 VARIATION OF (WEED-2).
CHECK THE LTC WEBSITE DATA SHEET FOR CURRENT STATUS OF VARIATION ASSIGNMENT
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE
TOP AND BOTTOM OF PACKAGE
3.00 ±0.10 1.65 ± 0.10
(4 SIDES) (2 SIDES)
0.75 ±0.05
0.00 – 0.05
(DD) DFN 1103
5
1
0.25 ± 0.05
0.50 BSC
2.38 ±0.10
(2 SIDES)
BOTTOM VIEW—EXPOSED PAD
MSE Package
10-Lead Plastic MSOP
(Reference LTC DWG # 05-08-1664)
2.794 p 0.102
(.110 p .004)
0.889 p 0.127
(.035 p .005)
BOTTOM VIEW OF
EXPOSED PAD OPTION
2.06 p 0.102
1
(.081 p .004)
1.83 p 0.102
(.072 p .004)
5.23
(.206)
MIN
2.083 p 0.102 3.20 – 3.45
(.082 p .004) (.126 – .136)
0.305 p 0.038
(.0120 p .0015)
TYP
0.50
(.0197)
BSC
RECOMMENDED SOLDER PAD LAYOUT
3.00 p 0.102
(.118 p .004)
(NOTE 3)
10
10 9 8 7 6
0.497 p 0.076
(.0196 p .003)
REF
0.254
(.010)
GAUGE PLANE
DETAIL “A”
0o – 6o TYP
4.90 p 0.152
(.193 p .006)
3.00 p 0.102
(.118 p .004)
(NOTE 4)
12345
0.53 p 0.152
(.021 p .006)
DETAIL “A”
1.10
(.043)
MAX
0.18
(.007)
SEATING
PLANE _{0.17 – 0.27}
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
(.007 – .011)
TYP
0.50
(.0197)
BSC
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
0.86
(.034)
REF
0.1016 p 0.0508
(.004 p .002)
MSOP (MSE) 0307 REV B
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
3407afa
15