English
Language : 

LTC3407A Datasheet, PDF (1/16 Pages) Linear Technology – Dual Synchronous 600mA, 1.5MHz Step-Down DC/DC Regulator
FEATURES
n High Efficiency: Up to 96%
n Low Ripple (35mVP-P) Burst Mode Operation;
IQ = 40μA
n 1.5MHz Constant Frequency Operation
n No Schottky Diodes Required
n Low RDS(ON) Internal Switches: 0.35Ω
n Current Mode Operation for Excellent Line
and Load Transient Response
n Short-Circuit Protected
n Low Dropout Operation: 100% Duty Cycle
n Ultralow Shutdown Current: IQ < 1μA
n Output Voltages from 5V down to 0.6V
n Power-On Reset Output
n Externally Synchronizable Oscillator
n Optional External Soft-Start
n Small Thermally Enhanced MSOP and 3mm × 3mm
DFN Packages
APPLICATIONS
n PDAs/Palmtop PCs
n Digital Cameras
n Cellular Phones
n Wireless and DSL Modems
LTC3407A
Dual Synchronous 600mA,
1.5MHz Step-Down
DC/DC Regulator
DESCRIPTION
The LTC®3407A is a dual, constant frequency, synchronous
step-down DC/DC converter. Intended for low power ap-
plications, it operates from a 2.5V to 5.5V input voltage
range and has a constant 1.5MHz switching frequency,
enabling the use of tiny, low cost capacitors and inductors
1mm or less in height. Each output voltage is adjustable
from 0.6V to 5V. Internal synchronous 0.35Ω, 1A power
switches provide high efficiency without the need for
external Schottky diodes.
A user selectable mode input is provided to allow the user
to trade-off ripple noise for low power efficiency. Burst
Mode® operation provides the highest efficiency at light
loads, while Pulse Skip Mode provides the lowest ripple
noise at light loads.
To further maximize battery life, the P-channel MOSFETs
are turned on continuously in dropout (100% duty cycle),
and both channels draw a total quiescent current of only
40μA. In shutdown, the device draws <1μA.
L, LT, LTC, LTM and Burst Mode are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners. Protected by U.S. Patents
including 5481178, 6580258, 6304066, 6127815, 6498466, 6611131.
TYPICAL APPLICATION
1mm High 2.5V/1.8V at 600mA Step-Down Regulators
VIN = 2.5V
TO 5.5V
10μF
VOUT2 = 2.5V
AT 600mA
2.2μH
22pF
RUN/SS2 VIN
MODE/SYNC
RUN/SS1
POR
LTC3407A
SW2
SW1
100k
RESET
2.2μH
22pF
10μF
VFB2
VFB1
887k
280k
GND
887k
442k
VOUT1 = 1.8V
AT 600mA
10μF
3407A TA01
LTC3407A Efficiency/Power Loss Curve
100
1
2.5V
90
1.8V
80
0.1
70
60
50
0.01
40
30
20
10
0
1
0.001
VIN = 3.3V
Burst Mode OPERATION
NO LOAD ON OTHER CHANNEL
0.0001
10
100
1000
LOAD CURRENT (mA)
3407A TA02
3407afa
1