LT1101_1 Datasheet, PDF (16/16 Pages) Linear Integrated Systems – Precision, Micropower, Single Supply Instrumentation Amplifier (Fixed Gain = 10 or 100)

LT1101
PACKAGE DESCRIPTIO
.300 – .325
(7.620 – 8.255)
N8 Package
8-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510)
.045 – .065
(1.143 – 1.651)
.130 ± .005
(3.302 ± 0.127)
.009 – .015
(0.229 – 0.381)
.065
(1.651)
TYP
+.035
.325 _–.015
( ) ^8.255
+0.889
–0.381
.100
(2.54)
BSC
NOTE:
1. DIMENSIONS
ARE
INCHES
MILLIMETERS
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)
.125
(3.175)
MIN
.018 ± .003
(0.457 ± 0.076)
.020
(0.508)
MIN
N8 0502
.400*
(10.160)
MAX
8
7
6
5
.255 ± .015*
(6.477 ± 0.381)
12
34
.030 ±.005
TYP
N
SW Package
16-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)
.050 BSC .045 ±.005
.398 – .413
(10.109 – 10.490)
NOTE 4
16 15 14 13 12 11 10 9
N
.420
.325 ±.005
MIN
NOTE 3
.394 – .419
(10.007 – 10.643)
123
N/2
RECOMMENDED SOLDER PAD LAYOUT
.005
(0.127)
RAD MIN
.291 – .299
(7.391 – 7.595)
NOTE 4
.010
(0.254
–
–
.029
0.737)
×
45°
0° – 8° TYP
N/2
123 45678
.093 – .104
(2.362 – 2.642)
.037 – .045
(0.940 – 1.143)
.050
.009 – .013
(0.229 – 0.330)
NOTE 3
.016 – .050
(0.406 – 1.270)
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
(1.270)
BSC _{.014 – .019}
(0.356 – 0.482)
TYP
2. DRAWING NOT TO SCALE
3. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
4. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.004 – .012
(0.102 – 0.305)
S16 (WIDE) 0502
16 Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone] ^● FAX: [phone] ^● www.linear.com
1101fa
LW/TP 1002 1K REV A • PRINTED IN USA
 LINEAR TECHNOLOGY CORPORATION 1989