LT1101_1 Datasheet, PDF (1/16 Pages) Linear Integrated Systems – Precision, Micropower, Single Supply Instrumentation Amplifier (Fixed Gain = 10 or 100)

LT1101
Precision, Micropower,
Single Supply Instrumentation
Amplifier (Fixed Gain = 10 or 100)
FEATURES
■ _{Gain Error: 0.04% Max}
■ _{Gain Nonlinearity: 0.0008% (8ppm) Max}
■ _{Gain Drift: 4ppm/°C Max}
■ _{Supply Current: 105µA Max}
■ _{Offset Voltage: 160µV Max}
■ _{Offset Voltage Drift: 0.4µV/°C Typ}
■ _{Offset Current: 600pA Max}
■ _{CMRR, G = 100: 100dB Min}
■ _{0.1Hz to 10Hz Noise: 0.9µVp-p Typ}
2.3pAp-p Typ
■ _{Gain Bandwidth Product: 250kHz Min}
■ _{Single or Dual Supply Operation}
■ _{Surface Mount Package Available}
U
APPLICATIO S
■ _{Differential Signal Amplification in Presence of}
Common Mode Voltage
■ _{Micropower Bridge Transducer Amplifier}
– Thermocouples
– Strain Gauges
– Thermistors
■ _{Differential Voltage-to-Current Converter}
■ _{Transformer Coupled Amplifier}
■ _{4mA to 20mA Bridge Transmitter}
, LTC and LT are registered trademarks of Linear Technology Corporation.
DESCRIPTIO
The LT^®1101 establishes the following milestones:
(1) It is the first micropower instrumentation amplifier,
(2) It is the first single supply instrumentation amplifier,
(3) It is the first instrumentation amplifier to feature fixed
gains of 10 and/or 100 in low cost, space-saving 8-lead
packages.
The LT1101 is completely self-contained: no external gain
setting resistor is required. The LT1101 combines its
micropower operation (75µA supply current) with a
gain error of 0.008%, gain linearity of 3ppm, gain drift of
1ppm/°C. The output is guaranteed to drive a 2k load to
±10V with excellent gain accuracy.
Other precision specifications are also outstanding:
50µV input offset voltage, 130pA input offset current, and
low drift (0.4µV/°C and 0.7pA/°C). In addition, unlike other
instrumentation amplifiers, there is no output offset
voltage contribution to total error.
A full set of specifications are provided with ±15V dual
supplies and for single 5V supply operation. The LT1101
can be operated from a single lithium cell or two Ni-Cad
batteries. Battery voltage can drop as low as 1.8V, yet the
LT1101 still maintains its gain accuracy. In single supply
applications, both input and output voltages swing
to within a few millivolts of ground. The output sinks
current while swinging to ground—no external, power
consuming pull down resistors are needed.
TYPICAL APPLICATIO
GROUND ¹
(REF)
SHORT TO 1, ²
G = 10
N.C. G = 100
90R
9R
R
90R
9R
R
8
OUTPUT
7 _{SHORT TO 8}
G = 10
N.C. G = 100
–
A
B
INVERTING ³
INPUT
+
R ≈ 9.2k
V^{– 4}
GROUND PIN 1, OUTPUT AT PIN 8
G = 100: NO ADDITIONAL CONNECTIONS
G = 10: SHORT PIN 2 TO PIN 1, SHORT PIN 7 TO PIN 8
6 _NONINVERTING
INPUT
5 _V+
LT1101 • TA01
Gain Error Distribution
30
G = 100
R_L = 50k
25
T_A = 25°C
930 UNITS
TESTED
20
IN ALL PACKAGES
15
10
5
0
–0.04 –0.03 –0.02 –0.01 0 0.01 0.02 0.03 0.04
GAIN ERROR (%)
LT1101 • TA02
1101fa
1