HASS-200-S Datasheet, PDF (3/3 Pages) LEM – Current Transducer HASS 50 .. 600-S

Dimensions HASS 50 .. 600-S (in mm)
22.8
16
10.4
d4.5
R5.2
Connection
Terminal pin1:
Terminal pin 2:
Terminal pin 3:
Terminal pin 4:
V_ref (IN/OUT)
Output
0V
+5 V
Ip
20.4
R0.5
Molex
41
d2.5
40 +/-0.5
Required connection circuit
HASS
Terminal Pin
1...Vref(IN/OUT) ^{1 Vref(IN/OUT)}
2 ^Output
V_ref(IN/OUT)
Output
3 ^0V
2..^R.^LO^=10KU^ohmTPUT ^0V
4 ^+5V _3...0V
+5V
4...+5V
Operation principle
+U_C
V_out
V_ref (IN/OUT)
0V
55
20
Mechanical characteristics
●● General tolerance
±0.5 mm
●● Aperture for primary conductor 20.4 × 10.4 × 0.5 mm
●● Transducer fastening
M4
●● Recommended fastening torque <1.5 N·m
●● Connection of secondary
Molex 5045-04A
Remarks
●● I_S is positive when I_P flows in the direction of the arrow.
●● Temperature of the primary conductor should not exceed
120 °C.
●● This is a standard model. For different versions (supply
voltages, turns ratios, unidirectional measurements...),
please contact us.
●● Installation of the transducer must be done unless
otherwise specified on the datasheet, according to LEM
Transducer Generic Mounting Rules. Please refer to
LEM document N°ANE120504 available on our Web site:
Products/Product Documentation.
5November2014/Version 17
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice
www.lem.com