|
ISPPAC-POWR1220AT8 Datasheet, PDF (1/54 Pages) Lattice Semiconductor – In-System Programmable Power Supply Monitoring, Sequencing and Margining Controller | |||
|
ispPAC-® POWR1220AT8
In-System Programmable Power Supply
Monitoring, Sequencing and Margining Controller
June 2008
Data Sheet DS1015
Features
â Monitor, Control, and Margin Multiple
Power Supplies
⢠Simultaneously monitors up to 12 power
supplies
⢠Provides up to 20 output control signals
⢠Provides up to eight analog outputs for
margining/trimming power supply voltages
⢠Programmable digital and analog circuitry
â Power Supply Margin and Trim Functions
⢠Trim and margin up to eight power supplies
⢠Dynamic voltage control through I2C
⢠Four hardware selectable voltage proï¬les
⢠Independent Digital Closed-Loop Trim function
for each output
â Embedded PLD for Sequence Control
⢠48-macrocell CPLD implements both state
machines and combinatorial logic functions
â Embedded Programmable Timers
⢠Four independent timers
⢠32µs to 2 second intervals for timing sequences
â Analog Input Monitoring
⢠12 independent analog monitor inputs
⢠Differential inputs for remote ground sense
⢠Two programmable threshold comparators per
analog input
⢠Hardware window comparison
⢠10-bit ADC for I2C monitoring
â High-Voltage FET Drivers
⢠Power supply ramp up/down control
⢠Programmable current and voltage output
⢠Independently conï¬gurable for FET control or
digital output
â 2-Wire (I2C/SMBus⢠Compatible) Interface
⢠Comparator status monitor
⢠ADC readout
⢠Direct control of inputs and outputs
⢠Power sequence control
⢠Dynamic trimming/margining control
â 3.3V Operation, Wide Supply Range 2.8V to
3.96V
⢠In-system programmable through JTAG
⢠Industrial temperature range: -40°C to +85°C
⢠100-pin TQFP package, lead-free option
Application Block Diagram
Primary
Supply
3.3V
Primary
Supply
Primary
Supply
2.5V
1.8V
Primary
Supply
POL#1
Primary
Supply
POL#N
8 Analog
Trim
Outputs
Power Supply
Margin/Trim
Control Block
ADC
4 Timers
ispPAC-POWR1220AT8
Other Control/Supervisory
Signals
16 Digital
Outputs
4 MOSFET
Drivers
CPLD
48 Macrocells
83 Inputs
6 Digital
Inputs
I2C
Interface
I2C
Bus
CPU
Description
Latticeâs Power Manager II ispPAC-POWR1220AT8 is a
general-purpose power-supply monitor, sequence and
margin controller, incorporating both in-system pro-
grammable logic and in-system programmable analog
functions implemented in non-volatile E2CMOS® tech-
nology. The ispPAC-POWR1220AT8 device provides 12
independent analog input channels to monitor up to 12
power supply test points. Each of these input channels
offers a differential input to support remote ground
sensing, and has two independently programmable
comparators to support both high/low and in-bounds/
out-of-bounds (window-compare) monitor functions. Six
general-purpose digital inputs are also provided for mis-
cellaneous control functions.
The ispPAC-POWR1220AT8 provides 20 open-drain
digital outputs that can be used for controlling DC-DC
converters, low-drop-out regulators (LDOs) and opto-
couplers, as well as for supervisory and general-pur-
pose logic interface functions. Four of these outputs
© 2008 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other
brand or product names are trademarks or registered trademarks of their respective holders. The speciï¬cations and information herein are subject to change without
notice.
www.latticesemi.com
1-1
DS1015_01.5
|
▷ |