W6156A Datasheet, PDF (9/14 Pages) Keysight Technologies – N6156A & W6156A

09 | Keysight | DTMB (CTTB) X-Series Measurement Application N6156A & W6156A - Technical Overview
Key Specifications
Definitions
–– Specifications describe the performance of parameters covered by the
product warranty.
–– 95th percentile values indicate the breadth of the population (≈2σ) of
performance tolerances expected to be met in 95% of cases with a 95%
confidence. These values are not covered by the product warranty.
–– Typical values are designated with the abbreviation "typ." These are
performance beyond specification that 80% of the units exhibit with a 95%
confidence. These values are not covered by the product warranty.
–– Nominal values are designated with the abbreviation "nom." These values
indicate expected performance, or describe product performance that is
useful in the application of the product, but is not covered by the product
warranty.
–– PXA and EXA specifications apply to analyzers with frequency options of
526 and lower. For analyzers with higher frequency options, specifications
are not warranted but performance will nominally be close to that shown in
this section.
Note: Data subject to change
You Can Upgrade!
Options can be added after your
initial purchase.
UP ^{All of our X-Series}
application options
are license-key
upgradeable.
GRADE
Description
PXA
MXA
EXA
CXA
Channel power
8 MHz integration bandwidth
−50 dBm (nom)
Absolute power accuracy
20 to 30 °C
Measurement floor
± 0.61 dB
(± 0.19 dB 95%)
−85.7 dBm
Channel power with shoulder attenuation view
7.61 MHz Integration bandwidth
ML ¹ = –14.0 dBm (nom)
Dynamic range, relative
Offset frequency
4.2 MHz
98.4 dB (103.7 dB
typ)
Power statistics CCDF
–50 dBm (nom)
± 0.82 dB
(± 0.23 dB 95%)
–82.7 dBm
ML ¹ = –16.0 dBm (nom)
92.2 dB (98.5 dB typ)
–50 dBm (nom)
± 0.94 dB
(± 0.27 dB 95%)
–78.7 dBm
ML ¹ = –16.0 dBm (nom)
86.9 dB (94.0 dB typ)
–50 dBm (nom)
± 1.33 dB
(± 0.61 dB 95%)
–75.7 dBm
ML ¹ = –15.0 dBm (nom)
84.5 dB (91.7 dB typ)
Minimum power at RF input
Histogram resolution
Adjacent channel power
−50 dBm (nom)
0.01 dB
–50 dBm (nom)
0.01 dB
–50 dBm (nom)
0.01 dB
−50 dBm (nom)
0.01 dB
Minimum power at RF Input; 0 to 55 °C
ACPR accuracy
Offset frequency
10 MHz
−36 dBm (nom)
−36 dBm (nom)
7.56 MHz noise bandwidth, method = IBW
± 0.18 dB
± 0.44 dB
−36 dBm (nom)
± 0.93 dB
−36 dBm (nom)
± 1.36 dB
1.  ML (mixer level) is RF input power minus attenuation