W6156A Datasheet, PDF (6/14 Pages) Keysight Technologies – N6156A & W6156A

06 | Keysight | DTMB (CTTB) X-Series Measurement Application N6156A & W6156A - Technical Overview
Measurement details
All of the RF transmitter measure-
ments as defined by the DTMB
(CTTB) standard, as well as a wide
range of additional measurements
and analysis tools, are available with
a press of a button (Table 2). These
measurements are fully remote con-
trollable via the IEC/IEEE bus or LAN,
using SCPI commands.
Analog baseband measurements
are available on the PXA or MXA
signal analyzer equipped with BBIQ
hardware. Supported baseband mea-
surements include all of the modula-
tion quality plus I/Q waveform and
CCDF measurements.
Table 2. One-button measurements provided by the N/W6156A measurement application
Technology
DTMB (CTTB)
Measurements
Channel power
RF spectrum
Shoulder attenuation
Spectrum mask (with analog TV in adjacent channel)
Adjacent channel power
Spectrum emission mask
Monitor spectrum
IQ waveform
Modulation accuracy
RMS EVM (%)
Peak EVM (%)
Position of peak EVM
RMS MER (dB)
Peak MER (dB)
Position of peak MER
RMS mag error (%)
Peak mag error (%)
Position of peak mag error
RMS phase error (deg)
Peak phase error (deg)
Position of peak phase error
Frequency error (Hz)
Clock error (Hz)
Tx power (dBm)
Quadrature error (deg)
Amplitude imbalance (%)
MER/EVM vs. subcarriers/frequency
Ampt vs subcarriers (dB)
Phase vs subcarriers (deg)
Group Delay vs subcarriers (ns)
Channel impulse response (dB)
MER of data block (dB)
MER of system info (dB)
MER of header (dB)
In-band spectrum ripple Amax-Ac (dB)
In-band spectrum ripple Amin-Ac (dB)