W2308EP Datasheet, PDF (8/26 Pages) Keysight Technologies – Quick Start for Signal Integrity

A. Place Components and Simulation Info on the Schematic
Mirroring the real world, there are thousands of compo-
nents available in the ADS library
.
–– The cursor becomes a crosshair with a ghostly image of
the component:
The palette on the left of the schematic is a tool to help
organize them. By default, the Lumped-Components palette
is displayed.
–– Click on the down arrow
to show the list of
available palettes.
–– Scroll down and select the Simulation-ChanSim palette.
–– Click on the blank canvas to place the transmitter and
create an instance of the component in your schematic.
–– The ghost image remains, so cancel out of the com-
mand by pressing the Esc key or by clicking on the End
Command icon
.
–– Click on the Diff Tx (differential transmitter) icon
–– Pick the Diff Term (differential termination) icon from
.
the Simulation-ChanSim palette and place it to the right
of the transmitter
.
Some components are used so much they live not in a
palette but on the toolbar, e.g. Wire and Ground.
–– Pick the Wire icon :
–– Join the + and – nodes to + and -, respectively. The red
dot turns blue to indicate connection has been made
.
8